Loading/ Unloading A Cassette - JVC GR-AXM 270 Instructions Manual

4
4
1
Erase Protection
Downloaded from:
2 2
3
3
5
Turn to take
up slack.
Gear
https://www.usersmanualguide.com/

Loading/ Unloading A Cassette

O PEN LCD MO N ITO R
Open the LCD monitor to an angle of over 45
1
degrees.
O PEN CASSETTE HO LDER
Press EJECT until the holder opens. Do not use force
2
to open.
IN SERT/ REMO VE CASSETTE
Make sure the label is facing outward.
3
CLO SE CASSETTE HO LDER
Press PU SH and make sure the holder is closed and
4
locked.
CLO SE LCD MO N ITO R
First make sure the holder is closed. Then close the
5
LCD monitor.
N O TES:
● Closing the LCD monitor while the cassette holder is
still open may cause damage to the LCD monitor.
● A cassette holder can't be opened unless a power
supply is attached.
● Make sure that the tape is not slack when loading the
cassette. If there is any slack, turn the gear on the
cassette in the direction of the arrow to take up the
slack.
● Make sure the Erase Protection tab is in the position
that allows recording. If not, slide the tab. Some
cassettes have removable tabs. If the tab has been
removed, cover the hole with adhesive tape.
● The cassette holder can't be opened while the
camcorder is in the record mode.
13
EN