CIOKS CRUX User Manual

Powering different pedal types
Each individual rig is different, therefore if you have questions about using the CIOKS CRUX power supply
please e-mail your detailed questions including the power requirements of your specific pedal directly to
support@cioks.com.
Technical specifications
Input: 24V DC
Output: 9V DC / 2700 mA or
12V DC / 2000 mA
Total output power: max. 24W
Size: 40 x 88 x 25,4mm (1.6x3.5x1.0")
Weight: 135g (0.3lb)
Warranty period: 5 years worldwide
What's in the box?
•
1 x CRUX adapter
•
1 x L2415 DC Link cable
•
2 x Flex cables, #1050 and #3050
•
Mounting hardware for Pedaltrain and Templeaudio boards
•
1 x Product manual
•
1 x Flex Guide
•
1 x CIOKS sticker sheet
Version 1.00
Introduction
Since 1991 the Danish company CIOKS has been providing guitar and bass players with reliable power
supplies dedicated for effect pedals. After more than a quarter of a century, CIOKS has designed the
CRUX power supply which is part of our Future Power Generation product range. CIOKS CRUX is the
ultimate add-on to CIOKS DC7 if you are using a Neural DSP Quad Cortex, a Line 6 HX-series pedal or
another power-hungry 9V or 12V multi-effects pedal. Simply connect the CRUX to the 24V outlet on
DC7, set the correct voltage on CRUX, connect the appropriate CIOKS Flex cable from CRUX to your
multi-effect pedal and you are good to go.
Using CRUX frees up the outlets on DC7 that would otherwise be needed to run these devices (for
instance four for a Neural DSP Quad Cortex and two outlets for a Line 6 HX Stomp), allowing you to run
more pedals along with your multi-effects device. CRUX therefore provides a simpler, more reliable
setup and gives you more options for connecting additional pedals.
Features
•
Converts the 24V aux outlet on DC7 into a powerful 9 or 12V outlet with a total power of 24W
•
Powers a Neural DSP Quad Cortex with DC7 saving you 4 outlets on the DC7
•
Overload and short circuit protected outlet
•
Overvoltage protected outlet protecting your equipment
•
CIOKS CRUX has the same 1-inch profile (25,4mm) as CIOKS DC7
•
Compatible with CIOKS MiniGRIP for drill-free mounting underneath Pedaltrain boards*
•
One 24V DC Link cable included
•
Two Flex cables included
•
Designed in Denmark, assembled in Poland
•
5-year worldwide warranty
•
5 Flex cables included
•
Designed in Denmark, assembled in Poland
•
5-year worldwide warranty
*Sold separately
December 2022 Version 1.00
CIOKS CRUX
Power Supply for Effect Pedals
User's Manual
Version 1.00 – December 2022
December 2022