Bsm (Blind Spot Monitor) - Toyota GR Corolla Manual

Canceling/resuming con-
trol
1
Press the cancel switch or
driving assist switch to cancel
control.
Control will also be canceled if the
brake pedal is depressed.
2
Press the "RES" switch to
resume control.
■ Automatic cancellation of the
cruise control
In the following situations, the cruise
control will be canceled automati-
cally:
● When the vehicle speed drops
approximately 10 mph (16 km/h)
or more below the set vehicle
speed
● When the vehicle speed drops
below approximately 20 mph (30
km/h)
● When the brake control or output
restriction control of a driving sup-
port system operates (For exam-
ple: PCS)
● When the shift lever is in N or the
clutch pedal is depressed for more
than a certain amount of time
● When the parking brake has been
operated
● Situations in which some or all of
the functions of the system cannot
operate: P.154
4-5. Using the driving support systems
BSM (Blind Spot Moni-
*
tor)
*
: If equipped
The Blind Spot Monitor is a
system that uses rear side
radar sensors installed on
the inner side of the rear
bumper on the left and right
side to assist the driver in
confirming safety when
changing lanes.
WARNING
■ Cautions regarding the use of
the system
● The driver is solely responsible
for safe driving. Always drive
safely, taking care to observe
your surroundings.
● The Blind Spot Monitor is a sup-
plementary function which alerts
the driver that a vehicle is in a
blind spot of the outside rear
view mirrors or is approaching
rapidly from behind into a blind
spot. Do not overly rely on the
Blind Spot Monitor. As the func-
tion cannot judge if it is safe to
change lanes, over reliance
could lead to an accident result-
ing in death or serious injury. As
the system may not function
correctly under certain condi-
tions, the driver's own visual
confirmation of safety is neces-
sary.
187
4