Toyota GR Corolla Manual page 305

Table of Contents

Advertisement

a tape.
2
Turn the bulb base counter-
clockwise and remove it.
3
Remove the light bulb.
4
When installing, reverse the
steps listed.
6-4. Do-it-yourself maintenance
WARNING
Replacing light bulbs
Turn off the lights. Do not
attempt to replace the bulb
immediately after turning off the
lights. The bulbs become very
hot and may cause burns.
Do not touch the glass portion
of the light bulb with bare
hands. When it is unavoidable
to hold the glass portion, use
and hold with a clean dry cloth
to avoid getting moisture and
oils on the bulb. Also, if the bulb
is scratched or dropped, it may
blow out or crack.
Fully install light bulbs and any
parts used to secure them. Fail-
ure to do so may result in heat
damage, fire, or water entering
the light unit. This may damage
the lights or cause condensa-
tion to build up on the lens.
To prevent damage or fire
Make sure bulbs are fully seated
and locked.
305
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents