lower connector system.
Canada only
With rigid lower attachments
2
Latch the buckles onto the
LATCH anchors.
For owners in Canada:
The symbol on a child restraint sys-
tem indicates
the presence of a
lower connector system.
Canada only
3
If the child restraint has a top
tether strap, follow the child
restraint manufacturer's
operation manual regarding
1-2. Child safety
the installation, using the top
tether strap to latch onto the
top tether strap anchor.
(P.58)
4
After installing the child
restraint system, rock it back
and forth to ensure that it is
installed securely. (P.55)
■
Laws and regulations pertain-
ing to anchors
The LATCH system conforms to
FMVSS225 or CMVSS210.2.
Child restraint systems conforming
to FMVSS213 or CMVSS213 speci-
fications can be used.
This vehicle is designed to conform
to SAE J1819.
WARNING
■
When installing a child
restraint system
Observe the following precau-
tions.
Failure to do so may result in
death or serious injury.
●
When using the LATCH
anchors, be sure that there are
no foreign objects around the
anchors and that the seat belt is
not caught behind the child
restraint system.
●
Follow all installation instruc-
tions provided by the child
restraint system manufacturer.
●
Child restraint systems cannot
be installed in the rear center
seat. Do not install the child
restraint system in the rear cen-
ter seat using the LATCH
anchors.
57
1