Table of Contents
Advertisement
disturbance
Program starts
not.
Door cannot be opened Rinse hold
nen.
The detergent solution does not come out. Drain pipe or water drainage hose is blocked.
pumped out.
Cause and remedy Start / Pause
Press Start pause
▶
Door is not closed.
Close the door.
1.
To start the program, press Begin/
2.
.
Break
Child lock is activated.
→ " Deactivating childproof lock ", page 52
▶
Completed in is activated.
check if Completed in is activated.
▶
→ "Keys", page 26
Laundry is jammed in the door.
Open the door again.
1.
Remove jammed laundry.
2.
Close the door.
3.
To start the program, press Begin/
4th
.
Break
is activated.
Continue the program by pressing Sluice
▶
change or Pumping out choose and Start pause
to press.
→
"Continuing the program at Rinse Hold", page 51
Temperature is too high.
Wait until the temperature has dropped.
▶
→ " Abort program ", page 50
▶
The water level is too high.
Start the program Pumping out.
▶
Power failure.
Open the door with the emergency release.
▶
→
"Emergency release", page 72
Clean the drain pipe and water drain
▶
running hose.
The drain pipe or water drainage hose is kinked or
pinched.
Make sure the drain pipe and the
▶
The water drainage hose is not kinked or trapped.
The drain pump is blocked.
→ " Cleaning the drain pump ", page 59
▶
was not pressed.
.
Troubleshooting de
65
Advertisement
Table of Contents
