Advertisement
Quick Links
Installation, Maintenance, & Repair
Series 2000SS/SE & 3000SS/SE
Double Check Valve Assemblies & Double Check Detector Assemblies
Sizes: 2
⁄
" – 6"SS (65 – 150mm)**
1
2
6" – 8"SE (150 – 200mm)**
WA R NI N G
!
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information can
result in death, serious personal injury, property damage, or
damage to the equipment.
Keep this Manual for future reference.
WARNING
!
You are required to consult the local building and plumbing
codes prior to installation. If the information in this manual
is not consistent with local building or plumbing codes,
the local codes should be followed. Inquire with governing
authorities for additional local requirements.
WARNING
!
Need for Periodic Inspection/Maintenance: This product must
be tested periodically in compliance with local codes, but at least
once per year or more as service conditions warrant. If installed on
a fire suppression system, all mechanical checks, such as alarms
and backflow preventers, should be flow tested and inspected in
accordance with NFPA 13 and/or NFPA 25. All products must be
retested once maintenance has been performed. Corrosive water
conditions, and/or unauthorized adjustments or repair could render
the product ineffective for the service intended. Regular checking
and cleaning of the product's internal components helps assure
maximum life and proper product function.
www.amesfirewater.com
2000SS
NOTICE
For Australia and New Zealand, line strainers should be installed
between the upstream shutoff valve and the inlet of the backflow
preventer.
NOTICE
The flange gasket bolts for the gate valves should be retightened
during installation as the bolts may have loosened due to storage
and shipping.
Testing
For field testing procedure, refer to Ames installation sheets
IS-A-ATG-1 found on www.amesfirewater.com.
For other repair kits and service parts, refer to our Backflow
Prevention Products Repair Kits & Service Parts price list
PL-A-RP-BPD found on www.amesfirewater.com.
For technical assistance, contact your local Ames representative.
** Metric Dimensions are nominal pipe diameter. This product is produced with
ASME/ANSI flanged end connections or DN flanged end connecitons.
A Division of Watts Water Technologies, Inc.
RP/IS-A-2000SS/SE&3000SS/SE
Advertisement
Related Manuals for Watts AMES SILVER BULLET 3000SS Series
Summary of Contents for Watts AMES SILVER BULLET 3000SS Series
- Page 1 ** Metric Dimensions are nominal pipe diameter. This product is produced with ASME/ANSI flanged end connections or DN flanged end connecitons. maximum life and proper product function. www.amesfirewater.com A Division of Watts Water Technologies, Inc.
- Page 2 Installation Instructions Maintenance Instructions Before installing any Ames backflow assembly, flush the line WARNING thoroughly to remove all debris, chips and other foreign objects. Depressurize valve before servicing. Failure to do so may make the assembly inoperable. Removing Cam-Checks The Ames 2000SS and 3000SS may be placed in any position Shut down water system and lock out system if possible.
- Page 3 Maintenance Instructions cont. Item # Description Figure 2 #1 Cam-Check #2 Cam-Check Cleaning Position #1 Cam-Check O-ring #2 Cam-Check O-ring Cover Plate Roller Ball Valve Groove Coupler Groove Coupler Gasket Ball Valve (Cover) Clapper Figure 3 Figure 4 #1 Cam-Check 2 "...
- Page 4 State of California to cause cancer and birth defects or other reproductive harm. For more information: www.watts.com/prop65 www.amesfirewater.com A Watts Water Technologies Company USA: Backflow- Tel: (916) 928-0123 • Fax: (916) 928-9333 Control Valves- Tel: (713) 943-0688 • Fax: (713) 944-9445 Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 RP/IS-A-2000SS/SE&3000SS/SE 1329...