Toto EcoPower TET2GB Installation And Owner's Manual page 12

INSTALLATION PROCEDURE — SMALL COVER
6. Pass the flush pipe and the
vacuum breaker through the
guide hole (Step 4) and
mount them on the bowl.
7. If required, cut the vacuum
breaker tube to the proper
length.
8. Make sure that the o-ring fits in the
groove at the end of the Flush
Valve tailpiece.
9. Exercise care to prevent damage
to the o-ring when inserting the
tailpiece into the control stop.
If lubrication is needed, wetting the
o-ring with water is sufficient.
10. Connect the Flush Valve to the
control stop and vacuum breaker
tube.
11. Tighten the coupling nut with a
wrench to prevent a water leak.
TET3LB32, TET3GB32
TET3UB32
7" (178 mm) min space
in wall with a min
12" x 12" access panel
or walk-in chase
Wall surface
6~6-1/2"
(152~165 mm)
1-1/2" (38 mm)
or 3/4" (19 mm)
Top spud
5"
(127 mm)
2-1/4"~2-3/4"
(57~70 mm)
3-3/4"~4-7/8"
Bowl
(95~124 mm)
TET3LB33, TET3UB33
TET3GB33
7" (178 mm) min space
in wall with a min
12" x 12" access panel
or walk-in chase
Wall surface
Back spud
Floor mount
Bowl
3-3/4"~4-7/8"
(95~124 mm)
- 12 -
TET3LB31, TET3UB31
TET3GB31
7" (178 mm) min space
in wall with a min
12" x 12" access panel
or walk-in chase
Wall surface
Back spud
Wall mount
3"
(76 mm)
Bowl
1-1/2"
(38 mm)
Snap ring
1-1/2"
(38 mm)
3-3/4"~4-7/8"
(95~124 mm)
O-ring