CONTENTS ChallengerOptics Full Feature PON Power Meter CO-OPM-PON 1.0 Introduction 1 1 Description 1 2 Special Features Operating Manual 1 3 Specifications 1 4 Accessories 1 5 Powering 1 6 Meter Care 2.0 Getting Started 2 1 Explanation of Operating Keys...
1 Introduction Description Quantity 1.1 Description Body 1 ea The next generation CO-OPM-PON power Meter is used Rubber Boot 1 ea to measure E-PON, G-PON, XGS-PON, and USB Data cable 1 ea 10G-EPON Also in RFoG It also combine the function USB Drive (User’s Manual)
Be sure to always use SC/APC Connections - Always connect the ONT to UPSTREAM signals (1270, 1310, 1610nm) and the OLT/Video port to DOWNSTREAM signals (1577, 1490, 1550nm) ChallengerOptics.com ChallengerOptics.com Wavelength Specific Optical Testing and Measurement Equipment Wavelength Specific Optical Testing and Measurement Equipment...
NOTICE Loss measurement Before you start measurements, make sure all end-faces of patch cords and connectors are clean and correctly connected Loss REF value ChallengerOptics.com ChallengerOptics.com Wavelength Specific Optical Testing and Measurement Equipment Wavelength Specific Optical Testing and Measurement Equipment...
▲▼ to choose the related Pass/Fail Threshold group to setup (10 groups) This sign means threshold Group 1 is chosen Current Group No ChallengerOptics.com ChallengerOptics.com Wavelength Specific Optical Testing and Measurement Equipment Wavelength Specific Optical Testing and Measurement Equipment...
The “ ” will highlight the Group No as in following picture, then press Cancel to exit Group Threshold settings ChallengerOptics.com ChallengerOptics.com Wavelength Specific Optical Testing and Measurement Equipment Wavelength Specific Optical Testing and Measurement Equipment...
Page 7
You will be prompted - “YES or NO” being displayed YES to delete all NO to cancel delete Total No of measurement records saved on the meter (up to 500) ChallengerOptics.com ChallengerOptics.com Wavelength Specific Optical Testing and Measurement Equipment Wavelength Specific Optical Testing and Measurement Equipment...
Page 8
/ 15 3 Software The CO-OPM-PON meter has a USB port with USB cable, as well as the related driver software USB cable is used for data upload and self calibration function For the details of the software functionality, please refer to the...