11.4 Tightening pulley and alternator for Poly-V belt
Important
Before proceeding with operation, read
11.4.1 Disassembly
1. Perform the operations from
2. Remove the belt H (
3. Undo and remove the screw A .
4. Fully undo the screw B and remove the tightening pulley
C .
1. Undo the screws D and remove the plate E and the pin F
.
1. Undo the screws G and H remove the alternator L .
1. Undo the screws M and remove the bracket N .
EN
246
Par. 3.3.2
point 1 to 3 of Par. 11.3
Fig. 11.10
) .
.
.
Fig 11.12
Fig 11.13
Fig 11.14
Fig 11.15