TIGER SAMPI LOG CABIN GENERAL INSTRUCTIONS
Step 11:
INSTALL ROOF BOARDS
• Before installing the roof boards, check that the cabin is square both vertically & horizontally.
Adjust if required.
• Position a tongue & groove roof board flush with purlin at one end of roof.
•
Fix through apex purlin using 2x N65 per board.
•
Fix through one additional purlin using 2x N65 per board.
•
Fix through side top logs using 2x N65 per board.
• Continue working across roof, repeating the steps above.
• The final roof board may need trimming to sit flush with purlin at end.
CRITICAL!: ALL ROOF BOARDS MUST HAVE 2X N65 PER FIXING POINT AS OUTLINED ABOVE.
Step 12:
INSTALL ROOF BATTEN AND SKIRTING
• Fix roof batten onto the underside of roof boards on low side using 6x N40, evenly spaced along length.
Finish with a piece of skirting, attached using 6x N40, evenly spaced along length.
NOTE: ROOF BATTENS AND SKIRTING MAY COME IN MORE THAN 1 SECTION.
18
tigersheds.com
J1
N65
0113 205 4189
sales@tigersheds.com
(Detail J1)
(Detail J2)
(Detail J3)
J2
N65
K1
N40
J3
N65
(Detail K1 & K2)
K2
N40