Spectrum Receiver Manual page 5

OPTIONAL
Program Remote
to Control Your TV
A
Turn on the device (TV, DVD player, etc.) that you want to control with the remote.
B
On the remote, press and hold the button that corresponds with your device
and the OK/SEL buttons for three seconds. An LED light will turn on to indicate
that the device is ready to be programmed.
C
Within 30 seconds, point the remote at the device, and then press the
CH+ or CH- button.
D
Continue pressing the CH+ or CH- button until the device turns off. Check if the
remote has been programmed successfully by pressing the POWER button to
turn on your device.
E
Press the corresponding device button to complete programming your remote.
An LED light will blink twice to confirm programming is complete.
Note: If the remote is unable to control your device after following these steps,
visit spectrum.net/click
Have Questions?
We're here to help. To learn more about your services,
visit spectrum.net/support
Didn't find what you're looking for? Call us at
RETURNING EQUIPMENT?
To avoid additional charges,
spectrum.net/equipment-return
visit
for additional instructions.
(855) 632-7020.
to view your options.