Vestil HDC-900 Series Manual page 14

TABLE OF CONTENTS Rev. 1/16/2023 HDC-905 MANUAL
FIG. 12: SINGLE PHASE, 208/230VAC ELECTRICAL CIRCUIT DIAGRAM (22124027 Rev. F)
NOTES:
Indicates wire and/or components not included with unit
*All components shown with unit in normal starting position, i.e. ram
fully raised and cabinet door open.
1TR is ICM Controls: part no. ICM1028; Delay-on-make set for 2
minutes.
1T is ACME part no. TB-81324; 150VA control transformer or
equivalent.
Manifold part no. 22-127-015.
**When pressure exceeds 350PSI, switch is open to allow
compression before ram rises.
TABLE OF CONTENTS Copyright 2023 Vestil Manufacturing Co. Page 14 of 19