Vestil TCD Series Instruction Manual

Vestil TCD Series Instruction Manual

Trash can dumpers

Advertisement

Quick Links

Table of Contents
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading.
If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance comply with laws,
regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Service:
For answers to questions not addressed in these instructions and to order replacement parts, labels, and
accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can also be
contacted online at http://www.vestilmfg.com/parts_info.htm.
TCD-M
Specifications...................................................................................................................
TCD-U
Specifications..................................................................................................................
Signal
Words...................................................................................................................................................
Hazards.....................................................................................................................................
Exploded Parts Diagrams and Bills of
Power Unit
Operation.................................................................................................................. .
*
Cleaning the Lowering Solenoid Valve......................................................................................9
*
Bleeding Air from the Hydraulic
*
Hydraulic Circuit
Diagram...........................................................................................................
*
*Electric Circuit Diagrams......................................................................................................11
*DC Modular Power Unit Exploded View and Bill of
*AC Modular Power Unit Exploded View and Bill of
Using the Trash Can
Dumper.......................................................................................................
Record of Satisfactory Condition
Inspections
(TCD-M).......................................................................................................................................
Record of Satisfactory Condition
Inspections
(TCD-U)...................................................................................................................
Troubleshooting.........................................................................................................................
Labeling
Diagrams..........................................................................................................................................
Limited
Warranty........................................................................................................................
*NOTE:
Trash can dumpers manufactured after 12-01-2018 receive a 2
GEN2). Diagrams and operating instructions for GEN2 power units are provided in separate MPU-AC/DC
Table of Contents
Rev. 5.7.2019
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web:
TCD -Series Trash Can Dumpers
Instruction Manual
TCD-M
Table of Contents
Materials........................................................................5, 6, 7,
System.........................................................................................
Materials..............................................................
Materials..............................................................
(TCD-M)......................................................................................
(TCD-U).......................................................................................
Copyright 2019 Vestil Manufacturing Co.
Vestil Manufacturing Corp.
Fax: (260) 665-1339
www.vestilmfg.com
TCD-U
nd
generation modular power unit (MPU
TCD MANUAL
Email:
info@vestil.com
manuals.*
Page 1 of 20
2
3
4
4
8
9
10
10
10
12
13
14
15
16
16
17
17
18
19
20

Advertisement

Table of Contents
loading

Summary of Contents for Vestil TCD Series

  • Page 1 Trash can dumpers manufactured after 12-01-2018 receive a 2 generation modular power unit (MPU GEN2). Diagrams and operating instructions for GEN2 power units are provided in separate MPU-AC/DC manuals.* Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 1 of 20...
  • Page 2 292 kg 53” ” ” ” ” ” 400 lb. 641 lb. TCD-M-72-DC 135 cm 228 cm 395 cm 198 cm 184 cm 223 cm 182 kg 292 kg Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 2 of 20...
  • Page 3 ” ” ” ” ” 400 lb. 875 lb. TCD-U-72-DC 135 cm 409 cm 229 cm 183 cm 223 cm 198 cm 228 cm 182 kg 398 kg Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 3 of 20...
  • Page 4: Signal Words

    Hazards: Vestil strives to identify all foreseeable hazards associated with the use of its products. However, no manual can address every possible risk. The most effective means for avoiding injury is to read all of the instructions prior to putting the dumper into service and to apply sound judgment whenever using this device.
  • Page 5 Flat washer, low carbon, USS, zinc 11057 33008 ” plated, ” 36104 Hex bolt, gr. A, zinc plated, ”-18 37024 Nylon insert lock nut, ” -16 37275 ”-10 top lock nut, zinc plated Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 5 of 20...
  • Page 6 TDC-M-60-AC & -DC TCD-M-72-AC & -DC 37275 ”-10 top lock nut, zinc plated 29 24-612-003 Weldment, cylinder pin 99-021- 15 99-024-003 Guard/cover/endcap/plug Cylinder, hydraulic, 2 ” x 18” 909-0011 Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 6 of 20...
  • Page 7 ” 33006 Flat washer, zinc plated, USS, ” Hex bolt, gr. A, zinc plated, ”-16 x 11103 ” 33620 Lock washer, medium split, ” 26 99-025-005 Handle, formed Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 7 of 20...
  • Page 8 24-612-003 Weldment, cylinder pin Hex bolt, gr. A, zinc plated, ”-18 99-021- 11057 Cylinder, hydraulic, 2 ” x 18” ram ” 909-001 36104 Hex nut, gr. A, zinc plated, ”-18 Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 8 of 20...
  • Page 9 If the poppet sticks, the valve stem might be bent. Replace the poppet if it doesn’t free up after cleaning. 8. Remove mineral oil from the valve with compressed air. 9. Move the poppet in and out. Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 9 of 20...
  • Page 10: Bleeding Air From Hydraulic System

    ” - 20, 2gpm 01-531-001 Velocity fuse, adjustable, brass 99-153-015 Valve, cartridge, NC, no coil, w/ nut 99-153-011 Check valve, size 08 Reservoir, L-shaped, 1.16 gal., 1.0 99-023-002 gal. nominal Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 10 of 20...
  • Page 11 In this diagram, all components are represented with the chute in lowered position. Overcurrent and short-circuit protection should be provided by the end user in accordance with recommendations and requirements in NEC (NFPA 70) and local codes. Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 11 of 20...
  • Page 12 In this diagram, all components are represented with the chute in lowered position. Overcurrent and short-circuit protection should be provided by the end user in accordance with recommendations and requirements in NEC (NFPA 70) and local codes. Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 12 of 20...
  • Page 13 21-034-025 Flanged inlet w/ locking ring 15-022-004 Relay, start solenoid 3MTST3540 1” hook & loop strip 10” HS64 Clamp, worm gear hose 99-522-027 Hand control, 2-button BG-12V Gauge, battery, charge indicator Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 13 of 20...
  • Page 14 132560 Contactor, motor, UL Listed Ab66jp Plate, enclosure 10-32 x ” z-plated machine 27531 C500 Connector, clamp, NM, Romex screw 32028 #8 – 18 x ” self-tapping screw Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 14 of 20...
  • Page 15 Using the trash can dumper NOTE: Only use TCD-M dumpers with Vestil model TH-32, TH-64, and TH-95 trash bins. Step 1: Move the trash can dumper (TCD) next to the dumpster or other large trash receptacle. Move the TCD by grasping the handles and pushing it in the intended direction.
  • Page 16 (indicating that water is present). With the chute in the fully lowered position, drain the oil and replace it with either Dexron transmission fluid or anti-wear hydraulic oil viscosity grade 150 SUS at 100°F (ISO 32 cSt at 40°C. Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 16 of 20...
  • Page 17 Dexron bracket Caster transmission fluid or anti-wear hydraulic oil viscosity grade 150 receiver SUS at 100°F (ISO 32 cSt at 40°C. **Shown without MPU for clarity Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 17 of 20...
  • Page 18: Troubleshooting

    Same as 5a. 7. Spongy or jerky chute motion. 7. Air in the hydraulic cylinders. 7. Bleed air per procedure described on p. 10 of this manual. Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 18 of 20...
  • Page 19 251 (electrical system specifications) Label 206 (close to or on oil reservoir) 248 = 115VAC, 1-phae 249 = 208-230VAC, 3-phase 250 = 460VAC, 3-phase 251 = 208-230VAC, 1-phase Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 19 of 20...
  • Page 20: Limited Warranty

    Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.

Table of Contents