Advertisement
TABLE OF CONTENTS
FIG. 9: STANDARD 3-PHASE ELECTRICAL CIRCUIT DIAGRAM (22124024 REV. G)
FIG. 9: Standard 3-phase electrical circuit diagram
NOTES:
Indicates wire and/or components not included with unit
*All components shown with unit in normal starting position, i.e. ram fully
raised and cabinet door open.
1TR is ICM Controls: part no. ICM1028; Delay-on-make set for 2
minutes.
1T is ACME part no. TB-81324; 150VA control transformer or equivalent.
Manifold part no. 22-127-021
**When pressure exceeds 350PSI, switch is open to allow compression
before ram rises.
Ferrule used for wire terminations.
TABLE OF CONTENTS
Rev. 1/16/2023
Copyright 2023 Vestil Manufacturing Co.
HDC-905 MANUAL
Page 11 of 19
Advertisement
