Top Chassis; Front Panel, Fr-1602 Board And Fc-1603 Board - Sony UBP-X800 Service Manual

2-3. TOP CHASSIS

2.
Two Screw +BTP 2.6X4 TYPE2 N-S
(tightening torque = 3.5 to 4.5kgf.cm)
2-4. FRONT PANEL, FR-1602 Board and *FC-1603 Board
4.
Panel, Front
1.
Nine Screw +BTP 3X8 TYPE2 N-S
(tightening torque = 6.5 to 7.5kgf.cm)
7.
*FC-1603 Board
1.
Eleven Screw +BVTP 3X8 TYPE2 IT-3
(tightening torque = 6.5 to 7.5kgf.cm)
3.
*Flexible Flat Cable (FLM-1001)
(CN300) refer caution figure 2-9-1 (Pg:2-5)
2.
Flexible Flat Cable (FIM1010)
(CN100) refer caution figure 2-9-1 (Pg: 2-5)
5.
Six Screw +BVTP2.6 (3CR)
(tightening torque = 4.5 to 5.5kgf.cm)
6.
FR-1602 Board
Note:
1) * - For UBP-X1000ES model only.
2) Hameron Tape is used to stick FFC/Harness to chassis.
Please attach Hameron tape at original location when
reassemble FFC/Harness.
3.
Chassis, Top
2-2
2