Sony UBP-X800 Service Manual page 46

( Network Test: Ping)
Network
Outline:
Ping Test for the wired Ethernet.
(Window 1)Ping Test
Operation:
[LEFT] Select Ifconfig Test.
[DOWN] Ping execution preparation.
[RET] Return to Service Top Menu.
(Window 2) The IP address of the Ping point is set up.
(IP address input mode)
When "Ping to :>" is reversed, [ENT] is pushed and IP is inputted.
Operation:
[ENT] Finish to input.
[RET] Finish to input.
[LEFT] Finish to input and Select Ifconfig Test.
[(NUM)] Input Character sting '0-9'
[TIME] Input Character sting '.'
[CLEAR] Backspace
(Windows3): Ping Test Active
When [START] is reversed, [ENT] is pushed and execute ping .
Operation:
[ENT] Activate Ping Test
[UP] The IP address of the Ping point is set up.
[RET] Return to Service Top Menu.
Front Panel Display:
NET
(Window 1)
* Network
Test: I f c o n f i g
Ping
Ping To :
[START]
(Window 2)
* Network
Ping
Test: I f c o n f i g
Ping To : 192.168.1.10
[ENT] : Release
[RET] : Release
[ LEFT] : l f conf i g Test
(Window 3)
[ ( N U M ) ] : ' 0- 9'
* Network
[ Tl M E] : ' . '
Test: I f c o n f i g Ping
[ C LEA R ] : B ackspace
Ping To : 192.168.1.10
[START]
Ping 192.168.1.10 OK!
[HELP : [ENT] ; Start [UP] [LEFT]
5-9