Speaker Configuration - Onkyo TX-SR574 Instruction Manual

First Time Setup—Continued
3
Use the Up and Down [
buttons to select an input selec-
tor, and use the Left and Right
[ ]/[ ] buttons to select:
IN1: Select if the video compo-
IN2: Select if the video compo-
IN3: Select if the video compo-
VIDEO: Select to output composite
4 Press the [SETUP] button.
Setup closes.
SETUP
Note:
• This procedure can also be performed on the AV
receiver by using the [SETUP], [ENTER], and arrow
buttons.
Speaker Configuration
This section explains how to specify your speaker con-
figuration.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm),
specify Large (full band). For those
with a smaller diameter, specify
Small (default crossover 100 Hz).
The crossover frequency can be
changed on page 50.
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
RECEIVER
SETUP
]/[ ]
nent is connected to COM-
PONENT VIDEO IN 1.
nent is connected to COM-
PONENT VIDEO IN 2.
nent is connected to COM-
PONENT VIDEO IN 3.
video and S-Video sources
from the COMPONENT
VIDEO OUT.
Cone diameter
2
Use the Up and Down [
buttons to select "2. SP Config,"
and then press [ENTER].
3
While the "Subwoofer" setting is
selected, use the Left and Right
[ ]/[ ] buttons to select Yes or
No.
Yes: Select if a subwoofer is con-
nected.
No: Select if no subwoofer is con-
nected.
4
Use the Down [
select "Front," and then use the
Left and Right [
select Small or Large.
Small: Select if the front speakers are
small.
Large: Select if the front speakers are
large.
Note:
• If the Subwoofer setting in step 3 is
set to No, this setting is fixed at Large
and does not appear.
5
Use the Down [
select "Center," and then use the
Left and Right [
select Small, Large, or None.
Small: Select if the center speaker is
small.
Large: Select if the center speaker is
large.
None: Select if no center speaker is
connected.
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
]/[ ]
] button to
]/[ ] buttons to
] button to
]/[ ] buttons to
35