Legacy WorkForce L8250 Owner's Manual

Retractable air hose reel, 50 ft.

Owner's Instructions

Part No. : L8250

Retractable Air Hose Reel, 50 ft.

CAUTION: Read all instructions and warnings before operating this product.

CAUTION: Inspect hose before each use. Do not exceed 300 psi working pressure. Do not kink, twist, knot

or abrade hose. Do not wrap hose around body. Keep hose away from hot surfaces and/or chemicals. KEEP

CHILDREN AWAY FROM WORK AREA!

CAUTION: When using treated wipes or silicone-based lubricant, keep away from children. Wipe is not for use on skin. After use,

wash with soap and warm water. Do not ingest wipe or fluid from wipe. Keep away from eyes, nose, and mouth. Before using any

wipe product or silicone-based lubricant product, follow instructions and cautions on wipe or silicone product packaging. Dispose

of any waste material according to local regulations.

•

•

•

•

Warranty

SAVE THESE INSTRUCTIONS! READ ALL INSTRUCTIONS!

Repair Parts

Description

RP018250

Pivot pin set for bracket

RP018251

Hose Stopper

RP018255

Latch Repair Kit

Table of Contents

Need help?

Do you have a question about the WorkForce L8250 and is the answer not in the manual?

Page 1 Owner’s Instructions Part No. : L8250 Retractable Air Hose Reel, 50 ft. SAVE THESE INSTRUCTIONS! READ ALL INSTRUCTIONS! CAUTION: Read all instructions and warnings before operating this product. CAUTION: Inspect hose before each use. Do not exceed 300 psi working pressure. Do not kink, twist, knot or abrade hose.
Page 2 4. Cycle hose by pulling it out and letting it retract 4-5 times. OPERATION The Legacy L8250 retractable hose reel can lock the air hose at approximately 18-inch intervals. Each latching interval is announced by a series of five "clicks." This "ratcheting"...
Page 3 INFORMATION Center Hole used for overhead installation only (See instructions) BOTTOM Cut out and tape together for full size mounting diagram  Mounting holes are 11 inches apart Learn more about other dispensing guns by Legacy Manufacturing on our website.