Hardware Setup; Mounting And Removing; Mounting/Removing Insert Type Option Of Vf-S15 - Toshiba TOSVERT VF-S15 Series Manual

2. Hardware Setup

When using this product with VF-S15, the optional adapter (SBP009Z) is required.

2.1. Mounting and removing

2.1.1. Mounting/removing insert type option of VF-S15

Refer to [Optional external devices] of E6581611.
▼ Mounting/removing option should be performed 15 minutes or more after the power is
shout off, and checking the charge lamp of the drive is OFF. The drive and option may
be damaged.
Mandatory
▼ Do not use tools for mounting/removing option . The drive and option may be damaged.
action
2.1.1.1. Mounting of option
1. Insert option into option adapter.
*Note: Mount option adapter to drive after option insertion.
Insert the option straightly and slowly along the guide inside option adapter. Otherwise, the connecter can
become damaged.
2. Remove the option connector
cover on control terminal cover.
Warning
SBP009Z
3. Lock the control terminal cover.
- 5 -
E6581911