Mitsubishi MELSEC-Q Series User Manual page 31

1 GENERAL SPECIFICATIONS AND PRECAUTIONS FOR USE OF I/O
MODULE
*1: If selected a different module type with the one selected by the function selector switch of
high-speed input module, an error occurs.
*2: If disabled the noise filter with the noise filter selector switch of the high-speed input
module, the setting value is ignored.
*3: When the actual response time differs from the setting value, refer to the specifications of
the relevant I/O modules.
1 - 16
(3) For high-speed input module/QX40H, QX70H, QX80H, QX90H
Select "Hi.input" or "Interrupt", which is the same module type as the one selected
with the high-speed input module switch, in "Type" combo box on the I/O
assignment tab of PLC parameter.*1 Then, click the "Detailed setting" button, and
then select the input response time in "I/O response time"*2*3 combo box.
Choose Hi. input/Interrupt.
MELSEC-Q
Choose Detailed setting.
Choose I/O response time
(default: 0.2ms).
1 - 16