Table of Contents
Advertisement
5 User instructions
This chapter describes how to operate the TAWI Light Lifting Trolley.
Start the lifter
•
The lifter can be stopped at any time by pressing the emergency stop on the control panel.
•
Only run the lifter when it is completely assembled.
•
Check the lifter for safe functionality prior to each use, for instructions.
•
The lifters has overload protection which will prevent tools from being raised when the specified
max load is exceeded. If the overload protection is activated, reduce the load and try again.
Charge the battery
The battery can not be charged too often. It is recommended to charge the battery as soon as it is not
in use. full charging cycle takes 8h.
•
Never use a damaged powercord, it can lead to electrical shock! Replace it immediately!
•
Never touch any parts inside the battery pack when charging. Touching electrical parts can
cause an electric shock.
Page 14
Advertisement
Table of Contents
