User Instructions; Start Lifter - TAWI VM30 User Manual

3 User instructions

This chapter describes how to operate

Start lifter

Review and perform relevant inspections: see 6 Service & maintenance on page 19.
1. Press the main switch or remote control to turn the power on.
2. Verify that the lift unit hangs and moves freely so that unnecessary wear is avoided.
3. Verify function of the lifter.
4. The lifter is now ready for use.
• A damaged electrical cable could cause electrical shock.
• The operator must be trained on the product and all instructions in the manual must be followed.
• When in operation the operator must not place his head above the unit.
• When in operation the operator must not be under a hanging load.
• The lift tube must be used only in a vertical position.
• The max lifting capacity (SWL) must not be exceeded.
• Use vacuum power only to handle the load. Do not lift the load by hand force.
• A load must never be left hanging for an extended period of time. This can cause the vacuum
pump to overheat.
VacuEasylift.
TAWI
15