Using The Tuner - Onkyo HT-R510 Instruction Manual

Using the Tuner

This chapter explains how to use the built-in tuner.
You can store your favorite radio stations as presets for con-
venient selection.
STANDBY/ON
STANDBY
A SPEAKERS B DISPLAY
PHONES
AUDIO
SELECTOR
30
MASTER VOLUME
PRESET/ADJUST
TUNING
DIRECT STEREO
SURROUND DSP
PRESET/ADJUST
SUBWOOFER
DIMMER DIGITAL INPUT MODE MEMORY FM MODE TUNING SPEAKER ADJUST AUDIO ADJUST
CLEAR
DVD VIDEO 1 VIDEO 2 VIDEO 3 TAPE TUNER C D
VCR
MEMORY
TUNER
FM MODE
PRESET
CABLE/SAT
CD/DVD
CH +
TUNER
Tuning into Radio Stations
1
TUNER
MASTER VOLUME
VIDEO 3 INPUT
S VIDEO VIDEO L AUDIO R 2
MASTER VOLUME
3
TUNING
/
If you selected the FM band:
The AUTO indicator appears on the display and the
HT-R510 searches for the next station automatically. Search-
ing stops when a station is found, and the TUNED and FM
STEREO indicators appear, as shown.
The HT-R510 searches the FM band in 0.1 MHz intervals.
If you selected the AM band:
The frequency stops changing when you release the TUN-
ING button. The HT-R510 doesn't automatically search for
AM stations. You must use the TUNING [ ] [ ] buttons.
Press repeatedly to change the frequency one interval at a
time, or press and hold to quickly change the frequency.
When you're tuned into a station, the TUNED indicator
appears.
The HT-R510 steps through the AM band in 10 kHz inter-
vals.
4
TUNING
Tuning into weak FM stations
If the signal strength of the station you are trying to tune into
is poor, you may not be able to tune into that station, or recep-
tion may be noisy. In this case, press the [FM MODE] button
to select mono mode and disable auto-tuning (the AUTO and
FM STEREO indicators will go off), and try tuning manu-
ally.
Use the [TUNER] input selector
button to select either AM or FM.
In this example, the FM band has been
selected.
Band Frequency
To adjust the volume, use the MAS-
TER VOLUME control.
The volume can typically be set to MIN, 1
though 79, or MAX.
Press and hold the TUNING [ ] or
[ ] button for more than half a sec-
ond and then release it.
TUNED
FM STEREO
To fine-tune the frequency, use the
TUNING [ ] [ ] buttons.
If you've selected the FM band, be careful
that you don't press either button for more
than half a second, otherwise the
HT-R510 will start searching for the next
station.
AUTO