Kolin KCF-10TRD Instruction Manual page 6

OPERATING INSTRUCTION
Display current wind
speed or auto
shutdown time
1. On/off
After the power is switched on, press the switch button "
After the plugging in of the unit, press the On/Off button
and the fan enters l speed working mode. Press the switch button again, and
the machine enters standby state.
2. Wind speed adjustment
After the fan is turned on, when touch the wind speed button "
After the switching on of the fan, touch the wind speed button
wind speed will increase by 1 speed according to the current speed every time.
If wind speed is adjusted to 9 speed, press the wind speed button again and
the gear will continue to circulate from 1 speed.
3. Timer setting
After the power is switched on, press the switch button "
After the turning on of the fan, press the timer button
the fan enters l speed working mode. Press the switch button again, and the
Press the timer button consecutively to set the time of operation from 1 hour up
machine enters standby state.
to 8 hours. To remove timer, press the timer button until "0h" appears.
4. Oscillation setting
When the fan is running, tap the oscillation button "
function. The angle of oscillation is 60 degrees. Tap the oscillation button once,
and the angle of the oscillation increase to 90 degrees and 120 degrees
successively until the oscillation function is closed.
5. Tilt setting
When the fan is running, tap the tilt oscillation button "
oscillation function. The fan tilt angle is 100°. Tap the tilt oscillation button again
to turn off the tilt oscillation function.
h
Tilt Timer
100°
120°
90°
60°
Oscillation Wind speed
On / Off
Timer shutdown
indicator
Angle of tilt oscillation
Angle of left and
right oscillation
" in standby state,
" in standby state, and
the control panel.
" to enable the oscillation
Tapping the button continuously,
" to enable the fan tilt
" lightly, the