Collection Bag; Specifications; Technical Data - Nakayama Pro ES2510 Manual

EN

SPECIFICATIONS

Technical Data

Model ES2510
Voltage 220 V / 50 Hz
Power S1:2200W 2500W P40
Cutting capacity 40mm
No load speed 5000rpm
Cable length 0.25m
Weight 10.25kg
Features Feed hopper, wheels
2
1. Hopper locking knob
2. ON/OFF switch
3. Motor
4. Stand assembly
5. Wheel axle
6. Hopper
WWW.NIKOLAOUTOOLS.GR
7. Main body
8. Paddle holder
9. Paddle
10. Wheels (two)

11. Collection bag

* The manufacturer reserves the right to make minor changes to product design and technical
specifications without prior notice unless these changes significantly affect the performance and safety
of the products. The parts described / illustrated in the pages of the manual that you hold in your hands
may also concern other models of the manufacturer's product line with similar features and may not be
included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair
or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided
equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer
shall not be liable for injuries and damages resulting from the use of non-conforming equipment.