Chicco 06867 MU Owner's Manual page 5

SETUP - POWER ON
8
Plug the cord into the back of
the Bottle Warmer Tank and then
plug it into the outlet. It will beep
once.
Touch the START/STOP button.
The icons on the Control Panel
will blink indicating that a cycle is
ready to be selected.
Note: If no warming cycle is selected for
three minutes the Warmer will beep and
switch off automatically.
WARMING - STEP 1
Place bottle, milk bag, or food jar
in the Bottle Warmer Tank.
For Bottles: Attach bottle
ring and nipple before
heating.
For Milk Bags: Make sure bag
is sealed before heating.
For Food Jars: Remove lid
before heating.
Make sure the tank water does
not reach the ring of the bottle,
the seal of the milk bags, or the
top of the food jar.
Note: Works with most bottle types.
If applicable, remove bottle venting
systems when warming. Bottles made
of various materials and construction
will heat at different times.
Use the Support Tray for food
jars and milk bags.
9