Chicco 06867 MU Owner's Manual page 2

IMPORTANT SAFETY
INSTRUCTIONS
READ AND FOLLOW ALL
INSTRUCTIONS
SAVE THESE
INSTRUCTIONS
READ INSTRUCTIONS
CAREFULLY
2
WARNING
WHEN USING THIS ELECTRICAL EQUIPMENT, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED INCLUDING THE FOLLOWING:
BURN HAZARD
To avoid risk of burns:
• Bottle warmer components and water
temperature can be very hot. Avoid direct
contact with water and steam. Handle with
care.
• Do not touch surfaces that may be hot.
Wait until all parts of the unit have cooled
before touching them.
• Bottles and food jars will be hot; remove
with care.
• Before serving, be sure food is at a safe
temperature.
• To avoid direct contact with hot water, use
support tray when warming food containers
or small bottles.
• Extreme caution must be used when moving
the bottle warmer with hot liquid in it.
CAUTION
• NEVER use without water.
• This is NOT a toy. Keep out of reach of children.
• Adult supervision required.
• Close supervision is necessary when any
appliance is used near children.
• For household use ONLY - Do NOT use
outdoors.
• Only use appliance for intended use, do not
modify or alter warmer.
• Do not use accessories, spare parts, or any
components not supplied or approved by
Chicco as they may cause injuries or
damage.
• Do NOT use with any bottle or food
container that is not intended to be heated.
• Do not place on or near a hot gas or electric
burner, or in a heated oven.
CAUTION
• Not for space heating purposes.
• Do NOT let cord hang over edge of table or
counter or touch hot surfaces.
• NEVER use an extension cord.
• Before serving, unplug cord from wall outlet.
Do not leave cord within child's reach.
• Always attach plug to bottle warmer first,
then plug cord into the wall outlet. Always
turn off the bottle warmer before removing
the plug from the wall outlet.
• This appliance has a polarized plug (one
blade is wider than the other). To reduce the
risk of electric shock, a polarized electrical
outlet will only allow the plug to be inserted
one way. If the plug does not fit fully into
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do
not attempt to modify the plug in any way.
• Remove plug from outlet when the
appliance is not in use, before putting on or
taking off parts, and before cleaning.
Allow to cool before handling.
• Inspect carefully before each use. Do not
operate any appliance with a damaged cord
or plug or after the appliance malfunctions
or is dropped or damaged in any manner. If
bottle warmer is faulty and/or not working
correctly, switch it off immediately and
unplug it from the wall outlet.
• To protect against electrical shock do not
immerse cord, plugs, or bottle warmer in
water or other liquid.
• Do NOT use if the bottle warmer, plug, or
cord accidentally falls into water or
becomes submerged.
3