Chicco 06867 MU Owner's Manual page 12

TROUBLE SHOOTING AND REPAIR
PROBLEM POSSIBLE CAUSE
The Warmer does not There is no power.
turn ON.
The cord plug or the cord
connector has not been plugged in
correctly, or they are damaged.
Appliance was submerged in water.
There are scale deposits in the
The feeding bottles are
appliance.
stained at the end of the
sterilization cycle.
High mineral content in tap water.
Excessive scale deposits on heating
Noise – Incomplete cycle.
plate.
Rapid scale build-up. Use of tap water with high mineral
content, softened or treated water.
22
SOLUTION
Check that there is power in the
electrical outlet.
Check that the plug and connector
have been plugged in correctly, and
that they are in good condition.
Should the product still not work,
contact Customer Service.
Discard unit.
The Warmer needs to be descaled.
See the "Descaling" section for
more details.
Use distilled water.
The Warmer needs to be descaled.
See the "Descaling" section for
more details.
Use distilled water.
The Warmer needs to be descaled.
See the "Descaling" section for
more details.
FOR MORE INFORMATION
Please do not return this product to the store.
If you have any questions or comments about
this product, or are missing any of the parts,
contact us in one of the following ways:
TECHNICAL INFORMATION
Reference: 00007390100070
Electrical Ratings: 220W 120V~ 60Hz
Model: 06867_MU
Made In China
!
= WARNING!
= WARNING! Hot Surface.
(877)-424-4226
@
info@chiccousa.com
www.chiccousa.com
1826 William Penn Way
Lancaster, PA 17601
= WARNING! Hot Steam.
Bottle Warmer
E351537
23