IKEA Finputsad Manual page 8

If there are not many dishes to be washed, a half loading
Select the program and then press the FLEXI WASH button:
may be used in order to save water, electricity and
the symbol of the chosen rack will appear on the display.
detergent.
The machine will switch off automatically during certain
By default the appliance washes dishes in all racks.
OPTIONS AND FUNCTIONS
Select the program and then press the FLEXI WASH button:
extended periods of inactivity, in order to minimise electri-
ENGLISH
To wash only the specific rack, press this button repeatedly:
the symbol of the chosen rack will appear on the display.
city consumption. If the crockery is only lightly soiled or
shown on the display (only lower rack)
By default the appliance washes dishes in all racks.
OPTIONS AND FUNCTIONS
if it has been rinsed with water before being placed in the
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
To wash only the specific rack, press this button repeatedly:
dishwasher, reduce the amount of detergent used accordingly.
shown on the display (only upper rack)
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
Functions shown on the display (only lower rack)
and beeps will sound. The option will not be enabled.
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
MODIFYING A RUNNING PROGRAM
and beeps will sound. The option will not be enabled.
If a wrong program was selected, it is possible to change it, pro- shown on the display (only cutlery rack)
shown on the display (only upper rack)
FLEXIBLE WASH
FLEXI WASH
vided that it has only just begun: open the door, press and hold FLEXI WASH
If there are not many dishes to be washed, a half
If there are not many dishes to be washed, a half loading
the ON/OFF button, the machine will switch off.
If there are not many dishes to be washed, a half loading
shown on the display (option is OFF and the appliance will
loading may be used in order to save water, electricity
may be used in order to save water, electricity and
shown on the display (only cutlery rack)
Switch the machine back on using the ON/OFF button and select
may be used in order to save water, electricity and
wash dishes in all racks).
detergent. and detergent.
the new wash cycle and any desired options; Start the wash cycle detergent.
Select the program and then press the FLEXI WASH button:
By default the appliance washes dishes in all racks.
Remember to load the upper or lower rack only, and to
the symbol of the chosen rack will appear on the display.
Select the program and then press the FLEXI WASH button:
by pressing START/Pause button and closing the door within 4 sec. shown on the display (option is OFF and the appliance will
To wash only the specific rack, press this button
By default the appliance washes dishes in all racks.
reduce the amount of detergent accordingly.
the symbol of the chosen rack will appear on the display.
wash dishes in all racks).
repeatedly:
To wash only the specific rack, press this button repeatedly:
If upper rack is removed, please apply detergent
By default the appliance washes dishes in all racks.
shown on the display (only lower rack)
ADDING EXTRA CROCKERY
shown on the display (only lower rack)
Remember to load the upper or lower rack only, and to
directly to tub instead of detergent dispenser.
To wash only the specific rack, press this button repeatedly:
Without switching off the machine, open the door (START/Pause reduce the amount of detergent accordingly.
ENGLISH
shown on the display (only upper rack)
shown on the display (only upper rack)
led starts blinking) (be ware of HOT steam!) and place the
shown on the display (only lower rack) If upper rack is removed, please apply detergent
DELAY
crockery inside the dishwasher. Press the START/Pause button
directly to tub instead of detergent dispenser.
shown on the display (only cutlery rack) shown on the display (only cutlery rack)
The start time of the program may be delayed for a period
and close the door within 4 sec., the cycle will resume from the
shown on the display (only upper rack)
of time between 1 and 12 hours. shown on the display (option is OFF and the appliance
point at which it was interrupted. shown on the display (option is OFF and the appliance will
DELAY
wash dishes in all racks). will wash dishes in all racks).
1. Press the DELAY button: the corresponding «h» symbol
The start time of the program may be delayed for a period
Remember to load the upper or lower rack only, and to
shown on the display (only cutlery rack)
appears on the display; each time you press the button,
ACCIDENTAL INTERRUPTIONS
reduce the amount of detergent accordingly.
DELAY
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of
DELAY
If upper rack is removed, please apply detergent
If the door is opened during the wash cycle, or if there is a power
1. Press the DELAY button: the corresponding «h» symbol
directly to tub instead of detergent dispenser. The start time of the program may be delayed for a
The start time of the program may be delayed for a period the selected wash cycle will be increased.
shown on the display (option is OFF and the appliance will
cut, the cycle stops. Press the START/Pause button and close
appears on the display; each time you press the button,
period of time between 1 and 12 hours.
of time between 1 and 12 hours.
2. Select the wash program, press the START/PAUSE
wash dishes in all racks).
the door within 4 sec., the cycle will resume from the point at
DELAY
the time (1h, 2h, etc. up to max. 12h) from the start of
1. Press the DELAY button: the corresponding «h»
button and within 4 seconds close the door: the timer
1. Press the DELAY button: the corresponding «h» symbol
which it was interrupted.
Remember to load the upper or lower rack only, and to
The start time of the program may be delayed for a period
symbol appears on the display; each time you press
the selected wash cycle will be increased.
will begin counting down.
appears on the display; each time you press the button,
of time between 1 and 12 hours.
reduce the amount of detergent accordingly.
the button, the time (1h, 2h, etc. up to max. 12h) from
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
1. Press the DELAY button: the corresponding «h» symbol
the time (1h, 2h, etc. up to max. 12h) from the start of
If upper rack is removed, please apply detergent
the start of the selected wash cycle will be increased.
button and within 4 seconds close the door: the timer
appears on the display; each time you press the button,
switches off and the wash cycle begins.
the selected wash cycle will be increased.
directly to tub instead of detergent dispenser. 2. Select the wash program, press the START/PAUSE
the time (1h, 2h, etc. up to max. 12h) from the start of
will begin counting down.
To adjust the delay time and select a shorter period of time,
the selected wash cycle will be increased.
2. Select the wash program, press the START/PAUSE
button and within 4 seconds close the door: the timer
3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE press the DELAY button. To cancel it, press the button
will begin counting down. button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer switches off and the wash cycle begins.
DELAY
repeatedly until the selected delayed start indicator light
3. Once this time has elapsed, the indicator light «h»
will begin counting down.
will begin counting down.
To adjust the delay time and select a shorter period of time,
«h» switches off.
3. Once this time has elapsed, the indicator light «h» The start time of the program may be delayed for a period switches off and the wash cycle begins.
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
switches off and the wash cycle begins.
To adjust the delay time and select a shorter period
of time between 1 and 12 hours.
The DELAY function cannot be set once a wash cycle
switches off and the wash cycle begins.
To adjust the delay time and select a shorter period of time,
repeatedly until the selected delayed start indicator light
of time, press the DELAY button. To cancel it, press
1. Press the DELAY button: the corresponding «h» symbol
has been started.
press the DELAY button. To cancel it, press the button To adjust the delay time and select a shorter period of time,
«h» switches off.
the button repeatedly until the selected delayed start
repeatedly until the selected delayed start indicator light
appears on the display; each time you press the button,
press the DELAY button. To cancel it, press the button
«h» switches off.
indicator light «h» switches off.
The DELAY function cannot be set once a wash cycle
the time (1h, 2h, etc. up to max. 12h) from the start of
repeatedly until the selected delayed start indicator light
The DELAY function cannot be set once a wash cycle SHORT TIME
The DELAY function cannot be set once a wash
has been started.
the selected wash cycle will be increased.
«h» switches off.
has been started.
cycle has been started.
This option can be used to reduce the duration of the main
2. Select the wash program, press the START/PAUSE
The DELAY function cannot be set once a wash cycle
SHORT TIME
programs while maintaining the same washing and drying
button and within 4 seconds close the door: the timer
SHORT TIME
has been started.
SHORT TIME
This option can be used to reduce the duration of
performance levels.
will begin counting down.
This option can be used to reduce the duration of the main
This option can be used to reduce the duration of the main
the main programs while maintaining the same
programs while maintaining the same washing and drying
After selecting the program, press the SHORT TIME button
3. Once this time has elapsed, the indicator light «h»
performance levels.
programs while maintaining the same washing and drying performance. Select a program, press the SHORT
and the indicator light will switch on. To deselect the option,
switches off and the wash cycle begins.
After selecting the program, press the SHORT TIME button
TIME button and the indicator light will switch on.
performance levels.
press the same button again.
and the indicator light will switch on. To deselect the option,
To adjust the delay time and select a shorter period of time,
To deselect the option, press the same button again.
After selecting the program, press the SHORT TIME button
press the same button again.
press the DELAY button. To cancel it, press the button
and the indicator light will switch on. To deselect the option, EXTRA DRY
EXTRA DRY
repeatedly until the selected delayed start indicator light
EXTRA DRY
Program
A higher temperature during the final rinse as an
press the same button again.
«h» switches off.
To improve the drying of the dishes, after selecting the
To improve the drying of the dishes, after selecting the
extended drying phase which allows improved drying.
program, press the EXTRA DRY button and the indicator
program, press the EXTRA DRY button and the indicator
The DELAY function cannot be set once a wash cycle
After selecting the program, press the EXTRA DRY
light comes on.
EXTRA DRY
light comes on.
A higher temperature during the final rinse and an extended has been started.
button and the indicator light comes on. To deselect
Eco To improve the drying of the dishes, after selecting the
drying phase allow for improving drying. To deselect the 1
A higher temperature during the final rinse and an extended
the option, press the same button again. The EXTRA
option, press the same button again. The EXTRA DRY
program, press the EXTRA DRY button and the indicator
drying phase allow for improving drying. To deselect the DRY option results in the lengthening of the wash
option results in the lengthening of the wash cycle.
SHORT TIME
light comes on.
cycle.
option, press the same button again. The EXTRA DRY
Conventional
2 TABLET (Tab)
A higher temperature during the final rinse and an extended
This option can be used to reduce the duration of the main
option results in the lengthening of the wash cycle.
TABLET (Tab)
TABLET (Tab)
wash and dry
This setting allows you to optimize the performance of
drying phase allow for improving drying. To deselect the
programs while maintaining the same washing and drying
Press the START/PAUSE button for 3 seconds (the
the program according to the type of detergent used.
This setting allows you to optimize the performance of
option, press the same button again. The EXTRA DRY
performance levels.
Press the START/PAUSE button for 3 seconds (the
corresponding symbol will light up) if you use
the program according to the type of detergent used.
Intensive
3
corresponding symbol will light up) if you use combined
option results in the lengthening of the wash cycle.
After selecting the program, press the SHORT TIME button
combined detergents in tablet form (rinse aid, salt
detergents in tablet form (rinse aid, salt and detergent in
Press the START/PAUSE button for 3 seconds (the
and detergent in 1 dose).
and the indicator light will switch on. To deselect the option,
1 dose).
corresponding symbol will light up) if you use combined
If you use powder or liquid detergent, this option
If you use powder or liquid detergent, this option
press the same button again.
Fast
4
should be off.
detergents in tablet form (rinse aid, salt and detergent in
should be off.
1 dose).
OPERATION INDICATOR
EXTRA DRY
OPERATION INDICATOR
If you use powder or liquid detergent, this option
A LED light projected on the floor indicates that the
Sanitizing
5
A LED light projected on the floor indicates that the
To improve the drying of the dishes, after selecting the
should be off.
dishwasher is working. One of the following operating dishwasher is working.
program, press the EXTRA DRY button and the indicator
modes can be selected:
a) Disabled function.
a) Disabled function.
light comes on.
b) When the cycle starts the light goes on for a few
Pre-Wash
6
b) When the cycle starts the light goes on for few seconds,
A higher temperature during the final rinse and an extended
stays off during the cycle and flashes at the end of the seconds, stays off during the cycle and flashes at the
cycle.
drying phase allow for improving drying. To deselect the
end of the cycle.
c) The light stays on during the cycle and flashes at the
option, press the same button again. The EXTRA DRY
c) The light stays on during the cycle and flashes at
Self-Clean
7 end of the cycle (default mode).
option results in the lengthening of the wash cycle.
If the delayed start was set, the light goes on either for the
the end of the cycle (default mode).
first few seconds or the entire duration of the countdown,
If the delayed start was set, the light goes on either
based on whether mode b) or c) was set.
for the first few seconds or the entire duration of the
The light goes off every time the door is opened. To select
the mode you prefer, switch on the machine, hold down
countdown, based on whether mode b) or c) was set.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
button P until one of the three letters appears on the display,
The light goes off every time the door is opened.
press button P until you reach the desired letter (or mode),
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
To select the mode you prefer, switch on the machine,
hold down button P to confirm the selection.
address: dw_test_support@whirlpool.com
Note: If NaturalDry is active and it opens the door, then
1. Go to the Dishwasher software menu pressing and holding
Operation Indicator will not flash at the end of cycle.
Pre-treatment of the dishes is not needed before any of the programs.
button (6 sec).
*) Not all options can be used simultaneously.
2. You switched to NaturalDry Control Menu, you could change
The guarantee is not applicable if faults are caused by such
circumstances.
heating element may be damaged as a result.
Whenever you need to add salt, it is mandatory to complete
the procedure before the beginning of the washing cycle.
SETTING THE WATER HARDNESS
To allow the water softener to work in a perfect way, it is essential
ENGLISH
that the water hardness setting is based on the actual water hard-
ness in your house. This information can be obtained from your local
water supplier. The factory setting is for average (3) water hardness.
TABLET (Tab)
• Switch on the appliance by pressing the ON/OFF button.
This setting allows you to optimize the performance of
Make sure the cap is screwed on tightly, so that no detergent can
the program according to the type of detergent used.
• Switch off the appliance by pressing the ON/OFF button.
get into the container during the wash program (this could damage
Make sure the cap is screwed on tightly, so that no detergent can
Press the START/PAUSE button for 3 seconds (the
• Hold down button
the water softener beyond repair).
get into the container during the wash program (this could damage
corresponding symbol will light up) if you use combined
• Switch on the appliance by pressing the ON/OFF button.
As soon as this procedure is complete, run a program without
the water softener beyond repair).
detergents in tablet form (rinse aid, salt and detergent in
• The current selection level number and the salt indicator light
loading. The "Pre-Wash" program alone is NOT
As soon as this procedure is complete, run a program without
1 dose).
Residual saline solution or grains of salt can lead to corrosion,
loading. The "Pre-Wash" program alone is NOT
If you use powder or liquid detergent, this option
NATURALDRY
• Press button
irreparably damaging the stainless steel components.
should be off. Residual saline solution or grains of salt can lead to corrosion,
Door opening system NaturalDry is a convection drying system
WATER HARDNESS TABLE).
The guarantee is not applicable if faults are caused by such
irreparably damaging the stainless steel components.
which automatically opens the door during/after drying phase
circumstances.
The guarantee is not applicable if faults are caused by such
OPERATION INDICATOR
to ensure exceptional drying performance every day. Door will
circumstances.
A LED light projected on the floor indicates that the
not be opened when the option of SHORT TIME is on due to high
dishwasher is working. One of the following operating
heating element may be damaged as a result. temperatures. Don't take out crockery immediately after door
modes can be selected:
1
Whenever you need to add salt, it is mandatory to complete
heating element may be damaged as a result. opens but wait in order to have proper drying.
a) Disabled function.
the procedure before the beginning of the washing cycle.
b) When the cycle starts the light goes on for few seconds, Whenever you need to add salt, it is mandatory to complete
2 The function cannot be activated for all the programs, please
stays off during the cycle and flashes at the end of the
the procedure before the beginning of the washing cycle.
refer to programs table. As additional steam protection, special
3
SETTING THE WATER HARDNESS
cycle.
designed protection foil is added together with the dishwasher.
c) The light stays on during the cycle and flashes at the
To allow the water softener to work in a perfect way, it is essential 4 SETTING THE WATER HARDNESS
To see how to mount protection foil please refer to (ASSEMBLY
end of the cycle (default mode).
that the water hardness setting is based on the actual water hard-
To allow the water softener to work in a perfect way, it is essential
5
If the delayed start was set, the light goes on either for the
INSTRUCTION).
ness in your house. This information can be obtained from your local
that the water hardness setting is based on the actual water hard-
first few seconds or the entire duration of the countdown,
NaturalDry functionality could be disabled by the user as
water supplier. The factory setting is for average (3) water hardness.
ness in your house. This information can be obtained from your local
• Switch off the appliance by pressing the ON/OFF button.
based on whether mode b) or c) was set.
follows:
water supplier. The factory setting is for average (3) water hardness.
The light goes off every time the door is opened. To select Setting is complete!
• Switch on the appliance by pressing the ON/OFF button.
the mode you prefer, switch on the machine, hold down
1. Go to the Operation Indicator menu as in last step, press and
• Switch off the appliance by pressing the ON/OFF button.
• Switch on the appliance by pressing the ON/OFF button.
button P until one of the three letters appears on the display,
FILLING THE RINSE AID DISPENSER
• Hold down button
• Switch off the appliance by pressing the ON/OFF button.
press button P until you reach the desired letter (or mode),
2. Press and hold
• Switch on the appliance by pressing the ON/OFF button.
• Hold down button
hold down button P to confirm the selection. Rinse aid makes dish DRYING easier. The rinse aid dispenser A
• The current selection level number and the salt indicator light
Note: If NaturalDry is active and it opens the door, then • Switch on the appliance by pressing the ON/OFF button.
should be filled when the RINSE AID REFILL indicator light
Operation Indicator will not flash at the end of cycle.
•
3. You switched to NaturalDry Control Menu, you could change
in the control panel is lit.
• Press button
WATER HARDNESS TABLE).
•
NaturalDry
NaturalDry is a convection drying system which automatically
To confirm the change and exit from the Control Menu
opens the door during/after drying phase to ensure exceptional
Level
please press and hold
drying performance every day. Door opens at the temperature
that is safe to your kitchen furniture, thus door will not be opened
1
when the option of SHORT TIME is on.
2 Medium
As additional steam protection, special designed protection foil is
added together with the dishwasher. To see how to mount protec-
3 Average
1. Open the dispenser B by pressing and pulling up the tab on
tion foil please refer to (INSTALLATION GUIDE).
4
NaturalDry functionality could be disabled by the user as follows:
the lid.
1. Go to the Dishwasher software menu pressing and holding
2. Carefully introduce the rinse aid as far as the maximum
5 Very hard
button (6 sec).
(110 ml) reference notch of the filling space - avoid spilling it.
2. You are currently in Light Control Menu (please refer to
If this happens, clean the spill immediately with a dry cloth.
• Switch off the appliance by pressing the ON/OFF button.
OPERATION INDICATOR description), if you don't want to
3. Press the lid down until you hear a click to close it.
Setting is complete!
• Switch off the appliance by pressing the ON/OFF button.
change anything please press and hold
NEVER pour the rinse aid directly into the tub.
the two letters appears on the display)
Setting is complete!
3. You switched to NaturalDry Control Menu, you could change
FILLING THE RINSE AID DISPENSER
status of NaturalDry functionality by pressing
EN
FILLING THE RINSE AID DISPENSER Available
E Rinse aid makes dish DRYING easier. The rinse aid dispenser A d
– enabled – disabled
To confirm the change and exit from the Control Menu please
should be filled when the RINSE AID REFILL indicator light
Rinse aid makes dish DRYING easier. The rinse aid dispenser A options
press and hold button (3 sec).
in the control panel is lit.
should be filled when the RINSE AID REFILL indicator light
in the control panel is lit.
50°
rapidly 3 times
55°
11
* depending on settings
65° -
1. Open the dispenser B by pressing and pulling up the tab on
the lid.
1. Open the dispenser B by pressing and pulling up the tab on
2. Carefully introduce the rinse aid as far as the maximum
-
50° - (110 ml) reference notch of the filling space - avoid spilling it.
2. Carefully introduce the rinse aid as far as the maximum
If this happens, clean the spill immediately with a dry cloth.
3. Press the lid down until you hear a click to close it.
NEVER pour the rinse aid directly into the tub.
3. Press the lid down until you hear a click to close it.
65° -
NEVER pour the rinse aid directly into the tub.
-
- -
-
65° -
11
To download the full version visit www.ikea.com
This setting allows you to optimize the performance of
corresponding symbol will light up) if you use combined
heating element may be damaged as a result.
the program according to the type of detergent used.
detergents in tablet form (rinse aid, salt and detergent in
Whenever you need to add salt, it is mandatory to complete
Press the START/PAUSE button for 3 seconds (the
1 dose).
the procedure before the beginning of the washing cycle.
EN
corresponding symbol will light up) if you use combined
If you use powder or liquid detergent, this option
SETTING THE WATER HARDNESS
detergents in tablet form (rinse aid, salt and detergent in
should be off.
To allow the water softener to work in a perfect way, it is essential
1 dose).
that the water hardness setting is based on the actual water hard-
If you use powder or liquid detergent, this option
ness in your house. This information can be obtained from your local
OPERATION INDICATOR
should be off.
water supplier. The factory setting is for average (3) water hardness.
A LED light projected on the floor indicates that the
• Switch on the appliance by pressing the ON/OFF button.
ENGLISH
dishwasher is working. One of the following operating
• Switch off the appliance by pressing the ON/OFF button.
OPERATION INDICATOR
hold down button
• Hold down button TABLET (Tab)
modes can be selected:
appears on the display, press button
• Switch on the appliance by pressing the ON/OFF button. A LED light projected on the floor indicates that the
a) Disabled function.
This setting allows you to optimize the performance of
• The current selection level number and the salt indicator light
reach the desired letter (or mode), hold down button
dishwasher is working. One of the following operating
b) When the cycle starts the light goes on for few seconds,
the program according to the type of detergent used.
to confirm the selection.
for 5 seconds, until you hear a beep. modes can be selected:
stays off during the cycle and flashes at the end of the
• Press the START/PAUSE button for 3 seconds (the Press button to select the desired hardness level (see
If NaturalDry is active and it opens the door, then
a) Disabled function.
cycle.
WATER HARDNESS TABLE).
corresponding symbol will light up) if you use combined
Operation Indicator will not flash at the end of cycle.
b) When the cycle starts the light goes on for few seconds,
c) The light stays on during the cycle and flashes at the
ENGLISH
detergents in tablet form (rinse aid, salt and detergent in
Water Hardness Table
stays off during the cycle and flashes at the end of the
to select the desired hardness level (see end of the cycle (default mode).
1 dose).
cycle. Level
If the delayed start was set, the light goes on either for the
If you use powder or liquid detergent, this option
c) The light stays on during the cycle and flashes at the
first few seconds or the entire duration of the countdown,
Water Hardness Table
1 Soft
should be off.
Make sure the cap is screwed on tightly, so that no detergent can
end of the cycle (default mode).
based on whether mode b) or c) was set.
°dH
2 Medium
get into the container during the wash program (this could damage
Level
If the delayed start was set, the light goes on either for the
The light goes off every time the door is opened. To select German degrees
the water softener beyond repair).
3 Average
first few seconds or the entire duration of the countdown,
OPERATION INDICATOR
Soft the mode you prefer, switch on the machine, hold down 0 - 6
As soon as this procedure is complete, run a program without
4 Hard
based on whether mode b) or c) was set.
loading. The "Pre-Wash" program alone is NOT
button P until one of the three letters appears on the display,
Medium 7 - 11
A LED light projected on the floor indicates that the
5 Very hard
Residual saline solution or grains of salt can lead to corrosion,
The light goes off every time the door is opened. To select
press button P until you reach the desired letter (or mode),
Average dishwasher is working. One of the following operating 12 - 17
irreparably damaging the stainless steel components.
the mode you prefer, switch on the machine, hold down
hold down button P to confirm the selection.
• Switch off the appliance by pressing the ON/OFF button. modes can be selected:
Hard The guarantee is not applicable if faults are caused by such 18 - 34
button P until one of the three letters appears on the display,
Setting is complete! Note: If NaturalDry is active and it opens the door, then
circumstances. • Switch off the appliance by pressing the ON/OFF bu
a) Disabled function.
Very hard 35 - 50
press button P until you reach the desired letter (or mode),
Setting is complete!
Operation Indicator will not flash at the end of cycle.
b) When the cycle starts the light goes on for few seconds,
NaturalDry
FILLING THE RINSE AID DISPENSER hold down button P to confirm the selection.
stays off during the cycle and flashes at the end of the
heating element may be damaged as a result.
FILLING THE RINSE AID DISPENSER
Note: If NaturalDry is active and it opens the door, then
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
Door opening system NaturalDry is a convection drying system
cycle.
Whenever you need to add salt, it is mandatory to complete
should be filled when the RINSE AID REFILL indicator light
Operation Indicator will not flash at the end of cycle.
Rinse aid makes dish DRYING easier. The rinse aid di
which automatically opens the door during/after drying phase to
c) The light stays on during the cycle and flashes at the
the procedure before the beginning of the washing cycle.
hold until menu appears.
in the control panel is lit.
NaturalDry
should be filled when the RINSE AID REFILL indicato
for 5 seconds, until you hear a beep.
ensure exceptional drying performance every day. Door opens at
end of the cycle (default mode).
again for 6 seconds to reach the
in the control panel is lit.
for 5 seconds, until you hear a beep.
SETTING THE WATER HARDNESS
the temperature that is safe to your kitchen furniture. NaturalDry is a convection drying system which automatically
If the delayed start was set, the light goes on either for the
NaturalDry menu.
To allow the water softener to work in a perfect way, it is essential
As additional steam protection, special designed protection foil is opens the door during/after drying phase to ensure exceptional
first few seconds or the entire duration of the countdown,
The current selection level number and the salt indicator light
NaturalDry
that the water hardness setting is based on the actual water hard-
drying performance every day. Door opens at the temperature
added together with the dishwasher. To see how to mount protec-
to select the desired hardness level (see
status of NaturalDry functionality by pressing button: based on whether mode b) or c) was set.
ness in your house. This information can be obtained from your local
NaturalDry is a convection drying system which automatically
that is safe to your kitchen furniture, thus door will not be opened
tion foil please refer to (INSTALLATION GUIDE).
Press button to select the desired hardness level (see
water supplier. The factory setting is for average (3) water hardness.
E – enabled d – disabled.
The light goes off every time the door is opened. To select
opens the door during/after drying phase to ensure exceptional
WATER HARDNESS TABLE).
when the option of SHORT TIME is on.
NaturalDry functionality could be disabled by the user as follows:
Water Hardness Table
the mode you prefer, switch on the machine, hold down
• Switch on the appliance by pressing the ON/OFF button.
drying performance every day. Door opens at the temperature
1. Go to the Dishwasher software menu pressing and holding As additional steam protection, special designed protection foil is
Water Hardness Table
°dH
button P until one of the three letters appears on the display,
• Switch off the appliance by pressing the ON/OFF button.
that is safe to your kitchen furniture, thus door will not be opened
added together with the dishwasher. To see how to mount protec- button (6 sec).
button (3 sec). B
German degrees
• Hold down button for 5 seconds, until you hear a beep.
press button P until you reach the desired letter (or mode),
Level
when the option of SHORT TIME is on.
2. You switched to NaturalDry Control Menu, you could change tion foil please refer to (INSTALLATION GUIDE).
1. Open the dispenser B by pressing and pulling up the tab on
• Switch on the appliance by pressing the ON/OFF button.
Soft 0 - 6 German degrees
hold down button P to confirm the selection.
As additional steam protection, special designed protection foil is
NaturalDry functionality could be disabled by the user as follows:
• status of NaturalDry functionality by pressing The current selection level number and the salt indicator light the lid.
1. Open the dispenser B by pressing and pulling up the
1 Soft
7 - 11
Note: If NaturalDry is active and it opens the door, then
added together with the dishwasher. To see how to mount protec- 2. Carefully introduce the rinse aid as far as the maximum
E d
1. Go to the Dishwasher software menu pressing and holding
– enabled – disabled
B
2 Medium
12 - 17
Operation Indicator will not flash at the end of cycle.
(110 ml) reference notch of the filling space - avoid spilling it.
• Press button Eco 50° to select the desired hardness level (see
2. Carefully introduce the rinse aid as far as the maxim
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
To confirm the change and exit from the Control Menu please
3 Average If this happens, clean the spill immediately with a dry cloth.
WATER HARDNESS TABLE).
Hard 18 - 34
NaturalDry functionality could be disabled by the user as follows:
press and hold 2. You are currently in Light Control Menu (please refer to button (3 sec).
AUTO 50°­ 60°
3. Press the lid down until you hear a click to close it.
4 Hard
1. Go to the Dishwasher software menu pressing and holding 35 - 50 Water Hardness Table
OPERATION INDICATOR description), if you don't want to
NEVER pour the rinse aid directly into the tub.
3. Press the lid down until you hear a click to close it.
5 Very hard
button (6 sec). Intensive 65°
change anything please press and hold
NEVER pour the rinse aid directly into the tub.
NaturalDry
Level
2. You are currently in Light Control Menu (please refer to
the two letters appears on the display)
Fast wash 30' 50° button (until one of
NaturalDry is a convection drying system which automatically
1 OPERATION INDICATOR description), if you don't want to Soft
3. You switched to NaturalDry Control Menu, you could change
opens the door during/after drying phase to ensure exceptional
change anything please press and hold
Duration of
2 Medium
Fast wash and dry 50° status of NaturalDry functionality by pressing
drying performance every day. Door opens at the temperature button:
the two letters appears on the display)
E d
– enabled – disabled
3 Average wash pro-
that is safe to your kitchen furniture, thus door will not be opened Glass 45°
3. You switched to NaturalDry Control Menu, you could change
To confirm the change and exit from the Control Menu please
gram
4 Hard
*)
when the option of SHORT TIME is on.
status of NaturalDry functionality by pressing
press and hold button (3 sec).
Silent 50° (Night program)
(h:min)
5 Very hard
As additional steam protection, special designed protection foil is
E d
– enabled – disabled
added together with the dishwasher. To see how to mount protec-
Sanitizing 65°
To confirm the change and exit from the Control Menu please
• Switch off the appliance by pressing the ON/OFF button.
2:45
tion foil please refer to (INSTALLATION GUIDE).
Setting is complete! press and hold button (3 sec).
Pre­Wash
NaturalDry functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding
FILLING THE RINSE AID DISPENSER
Self­Clean 65°
2:00
button (6 sec).
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
2. You are currently in Light Control Menu (please refer to
should be filled when the RINSE AID REFILL indicator light
in the control panel is lit. B
OPERATION INDICATOR description), if you don't want to
11
2:30
B
change anything please press and hold
the two letters appears on the display)
the lid.
3. You switched to NaturalDry Control Menu, you could change
11 0:55
status of NaturalDry functionality by pressing
(110 ml) reference notch of the filling space - avoid spilling it.
E d
– enabled – disabled
If this happens, clean the spill immediately with a dry cloth.
To confirm the change and exit from the Control Menu please
1:40
press and hold button (3 sec).
B
1. Open the dispenser B by pressing and pulling up the tab on
0:10
the lid.
2. Carefully introduce the rinse aid as far as the maximum
(110 ml) reference notch of the filling space - avoid spilling it.
If this happens, clean the spill immediately with a dry cloth.
0:50
3. Press the lid down until you hear a click to close it.
NEVER pour the rinse aid directly into the tub.
• The current selection level n
• Press button
heating element may be damaged as a result.
supplied.
s.
Whenever you need to add salt, it is mandatory to
• Switch it off using the ON
the procedure before the beginning of the washing
Setting is complete!
If the rinse aid level is set to
SETTING THE WATER HARDNESS
supplied. The LOW RINSE A
To allow the water softener to work in a perfect way, it is e
run out of rinse aid. A maxim
that the water hardness setting is based on the actual wa
the dishwasher model. The fa
ness in your house. This information can be obtained from
please follow instruction abov
water supplier. The factory setting is for average (3) wate
• If you see bluish streaks o
• If there are drops of wate
• Switch on the appliance by pressing the ON/OFF bu
until one of the three letters
for 5 seconds, until you hear a beep.
set a high number (3-4).
• Switch off the appliance by pressing the ON/OFF bu
until you
• Hold down button for 5 seconds, until you hear a
ADJUSTING THE DOSAGE
ENGLISH
• Switch on the appliance by pressing the ON/OFF bu
If you are not completely satisfi
FILLING THE DETERGE
• The current selection level number and the salt indi
adjust the quantity of rinse aid u
• Switch the dishwasher on us
dishwashers.
• Press button to select the desired hardness level
• Switch it off using the ON/OF
Make sure the cap is screwed on tightly, so t
WATER HARDNESS TABLE). To achieve the best washing
• Press button
get into the container during the wash program
useof detergent, rinse aid liq
• Switch it on using the ON/OF
Water Hardness Table
°dH
the water softener beyond repair).
We recommend using deterg
• The current selection level num
German degrees French degrees
As soon as this procedure is complete, run a
or chlorine, as these produc
Level
• Press button
German degrees
loading. The "Pre-Wash" program alone is N 0 - 6
Good washing results also d
s. supplied.
Residual saline solution or grains of salt can
detergent being used.
1 °fH Soft
7 - 11 11 - 20
• Switch it off using the ON/OF
s.
irreparably damaging the stainless steel com
French degrees
Exceeding the stated amoun
2 Medium Setting is complete!
12 - 17 21 - 30
The guarantee is not applicable if faults are c
wash and increases environ
0 - 10
If the rinse aid level is set to ZE
3 Average
circumstances.
18 - 34 31 - 60
The amount can be adjusted
11 - 20 supplied. The LOW RINSE AID
4 Hard
normally soiled items, use a
35 - 50 61 - 90
run out of rinse aid. A maximum
21 - 30
detergent) or 35ml (liquid de
5 Very hard
the dishwasher model. The fact
heating element may be damaged as a res
detergent directly inside the
31 - 60
please follow instruction above
Whenever you need to add salt, it is mand
will be enough.
• If you see bluish streaks on t
61 - 90
the procedure before the beginning of the
If the crockery is only lightly
• If there are drops of water or
water before being placed in
set a high number (3-4).
SETTING THE WATER HARDNESS
of detergent used according
To allow the water softener to work in a perfect
powder/gel putted inside the
that the water hardness setting is based on the
FILLING THE DETERGENT
ness in your house. This information can be ob
water supplier. The factory setting is for averag
dishwashers.
• Switch on the appliance by pressing the O
To achieve the best washing an
• Switch off the appliance by pressing the O
useof detergent, rinse aid liquid
B
• Hold down button
We recommend using detergen
A
• Switch on the appliance by pressing the O
or chlorine, as these products a
• The current selection level number and th
Good washing results also dep
detergent being used.
°fH
A
• Press button to select the desired hard
French degrees
°dH °fH Exceeding the stated amount d
WATER HARDNESS TABLE).
B wash and increases environme
0 - 10 French degrees
The amount can be adjusted to
DOOR OPENING Water Hardness Table
0 - 6 0 - 10 1. When measuring out the
11 - 20
A
normally soiled items, use appr
the lid.
lier information to add the
7 - 11 11 - 20
21 - 30
Level
after 165 min detergent) or 35ml (liquid deter
B there are indications to
12 - 17 21 - 30
detergent directly inside the tub
(110 ml) reference notch of the filling space - avoid s
31 - 60 2.
Remove detergent residu
1 Soft
80-170 min*
will be enough.
If this happens, clean the spill immediately with a dry
and close the cover until
18 - 34 31 - 60
61 - 90
2 Medium
If the crockery is only lightly soi
3. Close the lid of the deterg
35 - 50 61 - 90
end of cycle
°dH °fH
button (until one of
water before being placed in th
the closing device is secu
3 Average
German degrees French degrees
of detergent used accordingly (
N/A
4 Hard
The detergent dispenser au
powder/gel putted inside the tu
0 - 6 0 - 10
according to the program. If
5 Very hard
button (until one of
7 - 11 11 - 20
end of cycle
recommend using the TABL
Water
12 - 17 21 - 30 program so that the best wa
• Switch off the appliance by pressing the O
end of cycle
consumption consumption
achieved.
Setting is complete!
18 - 34 31 - 60
(litres/cycle)
end of cycle
35 - 50 61 - 90
**)
B
FILLING THE RINSE AID DISPENSER
N/A
A
Rinse aid makes dish DRYING easier. The ri
12.0
should be filled when the RINSE AID REFILL
N/A
in the control panel is lit.
N/A
15.0
1. When measuring out the de
A
lier information to add the p
A
15.0
B there are indications to he
button (until one of
2. Remove detergent residues
and close the cover until it c
3. Close the lid of the detergen
11.5
B
button:
the closing device is secure
1. Open the dispenser B by pressing and pull
The detergent dispenser autom
the lid.
11.5 according to the program. If all
2. Carefully introduce the rinse aid as far as t
A
recommend using the TABLET
(110 ml) reference notch of the filling space
program so that the best wash
If this happens, clean the spill immediately
achieved.
3. Press the lid down until you hear a click to
4.5
NEVER pour the rinse aid directly into the
8.0
EN
• Switc
Setting
to select t
If the rin
supplied
8
run out
the dish
please f
• If you
• If the
set a
FILLIN
dishwa
ADJUSTING THE
To achi
If you are not comp
useof d
adjust the quantity o
We reco
• Switch the dishw
or chlor
three times -
• Switch it off using
Good w
• Press button t
deterge
°fH
• Switch it on usin
°dH Exceed
to select the
• The current select
9
wash a French
0 - 10
ADJUSTING
• Press button t
The am
0 - 6 0
If you are not
supplied.
normall
7 - 11 adjust the qua 11
• Switch it off using
deterge
• Switch the
Setting is complete!
12 - 17 21
deterge
• Switch it of
If the rinse aid level
will be e
18 - 34 31
• Press butto
supplied. The LOW
If the cr
• Switch it on
35 - 50 61
run out of rinse aid.
water b
• The current
the dishwasher mod
of deter
• Press butto
please follow instruc
powder
supplied.
s.
• If you see bluish
• Switch it of
• If there are drops
Setting is com
set a high numbe
If the rinse aid
supplied. The
FILLING THE DE B
run out of rins
the dishwashe
A
please follow
dishwashers.
• If you see b
To achieve the best
for 5 seconds, until y
• If there are
useof detergent, rin
set a high n
We recommend usi
or chlorine, as these
1. Whe
Good washing resu
FILLING TH
lier i
detergent being use
A
B th
Exceeding the state
dishwashers
2. Rem
button:
wash and increases
To achieve the
and
The amount can be
°dH
useof deterge
3. Clos
normally soiled item
German degrees
We recomme
the c
detergent) or 35ml (
0 - 6
or chlorine, as
detergent directly in
The de
Good washing
7 - 11
will be enough.
accord
detergent bein
If the crockery is on
12 - 17
recomm
Exceeding the
water before being
progra
18 - 34
wash and incr
of detergent used a
achiev
The amount c 35 - 50
powder/gel putted in
button:
normally soile
Energy
detergent) or
detergent dire
(kWh/cycle)
button:
will be enough
If the crockery
B
water before b
0.92
of detergent u
A
powder/gel pu
1.35
1. When measurin
B
1.50
lier information t
B there are indic
A
2. Remove deterge
and close the co
1.10
3. Close the lid of t
the closing devic
1.30
The detergent disp
1. When mea
according to the pr
lier informa
recommend using
B there ar
program so that the
0.01 2. Remove d
achieved.
and close
3. Close the
the closing
0.80
The detergen
according to
recommend u
program so th
achieved.