Ford MUSTANG 2022 Owner's Manual page 48

Table of Contents

Advertisement

Seatbelt Status
To view the seatbelt status, use the
information display controls on the
steering wheel.
E357538
E274703
A
Seatbelt fastened.
B
Seatbelt not fastened.
C
Seatbelt recently unfastened.
D
Fault.
Deactivating and Activating the
Seatbelt Reminder - Front Seats Only
WARNING: While the system
allows you to deactivate it, this system
is designed to improve your chances of
being safely belted and surviving an
accident. We recommend you leave the
system activated for yourself and others
who may use the vehicle.
2022 Mustang (CZG) Canada/United States of America, Vehicles Built From: 27-09-2021, enUSA, Edition date: 202110, First-Printing
Seatbelts
Note: The driver and front passenger
warnings switch on and off independently.
When you perform this procedure for one
seating position, do not buckle the other
position as this terminates the process.
Read Steps 1 - 4 before starting the
procedure.
Make sure that:
You set the parking brake.
The transmission is in park (P).
The ignition is off.
You close all vehicle doors.
You unbuckle the driver and front
passenger seatbelts.
1.
Switch the ignition on. Do not start the
engine.
2. Wait until the seatbelt warning lamp
turns off (about one minute). After
Step 2, wait an additional five seconds
before proceeding with Step 3. When
you start Step 3, you must complete
the procedure within 30 seconds.
3. For the seating position you are
switching off, buckle then unbuckle the
seatbelt three times at a moderate
speed, ending in the unbuckled state.
After Step 3, the seatbelt warning lamp
turns on.
4. When the seatbelt warning lamp is on,
buckle then unbuckle the seatbelt.
After Step 4, the seatbelt warning lamp
flashes for confirmation.
This switches the feature off if it is
currently on.
This switches the feature on if it is
currently off.
45

Advertisement

Table of Contents
loading

Table of Contents