Searching For Your Code; Checking The Codes - One for All URC-4021 User Manual

CTGAE4P 4021 manual booklet

SEARCHING FOR YOUR CODE

If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1.
2.
3.
4.
5.
6.

CHECKING THE CODES

If you have set up the remote control using the
cedure (as above), you may need to find out which four-digit code is operat-
ing your equipment. For example,to find out which code is operating your
TV:
1.
2.
3.
4.
On the remote control, press
Press and hold until the
SET
then release .
SET
Enter - - . The
9 9 1 LED
Aim the remote control at the TV and slowly alternate
between pressing
POWER
off (after pressing
POWER
Power key, you can substitute another function, such as
L, or
digits ~ ,
0 9 CH
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
To lock in the code, press and release
twice.
To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
On the remote control, press
Press and hold until the
SET
then release .
SET
Enter - - . The
9 9 0 LED
To view the code for the first digit, press
seconds, count the
LED
write down the number in the leftmost box in the TV
code boxes on page 8.
NOTE: If a code digit is "0", the LED will not blink.
9
5/24/04 12:10 PM
once.
TV
(red light) blinks twice,
LED
will blink twice.
and . Stop when the TV turns
TV
). If the device does not have a
).
PLAY
. The
SET
Searching For Your Code
once.
TV
(red light) blinks twice,
LED
will blink twice.
1
blinks (e.g., three blinks = 3) and
Page 9
will blink
LED
pro-
once.Wait 3