One for All URC-4730 Supplementary Manual

Installing the Batteries

Your One For All Access 4 requires four (4)
new AAA alkaline batteries.
To install the batteries:
1. On the back of the One For All
Access 4 , pull back on the tab and
lift the battery cover off.
POWER
VCR CBL
SAT
DVD
2. Match the + and - marks on the
batteries to the + and - marks in
the battery case, then insert the
batteries.
3. Press the battery cover back into
place.
4. Test the unit by pressing POWER.
POWER
If the batteries are inserted
correctly, the red light (LED) will
blink once.
NOTE: Removing the batteries for more than
30 minutes will require you to reprogram your
remote.
Setting Up Your Components
Feature – Function
Programming the One For All Access 4 to
The Red Light (LED) flashes red
operate your TV:
to show that the remote is
working.
Locate the brand name of your TV and then
write it in the space below.
The POWER key operates the
POWER
POWER ON and OFF for your
TV Brand: __________________________
TV, VCR, DVD and Cable
Converter.
Locate the brand name of your TV in the
"SETUP CODES FOR TVs" section. The brands
The TV, VCR/DVD, CBL/SAT,
are listed in alphabetical order with the most
VCR
and AUX keys are used to select
DVD
popular codes listed first. You will use one of
the home entertainment
CBL these codes to program your One For All Access
SAT
component you want to control.
4 to operate your TV.
The CH L/M (Channel Up/Down)
To program the One For All Access 4 to
keys operate the CHANNEL UP/
operate your TV:
DOWN feature of your home
entertainment components.
1. Turn on your TV.
The VOL +/- (Volume Up/Down)
2. Press TV and release. Press and
and MUTE keys operate the
hold SET until the One For All
VOLUME UP/DOWN and MUTE
Access 4's red light blinks twice,
of your home entertainment
then release SET.
components.
3. Enter the first four-digit TV code
The SET key is used to program
listed for your brand in the "SETUP
One For All Access 4
your .
CODES FOR TVs" section. If you
perform this procedure correctly,
The PREV CH (Previous
the red light will blink twice when
Channel) key operates the same
you enter the final digit of your
as the Last Channel or Recall
code.
key on your original remote.
The SLEEP key accesses the 4. Aim the One For All Access 4 at
POWER
sleep function of your TV or your TV and press POWER. Your
Cable Converter, provided the
TV should turn off. If your TV does
component has a SLEEP TIMER
not respond, repeat steps 2-4,
function.
trying each code listed for your
brand until you find the one that
The REC (Record), PAUSE,
operates your TV.
REW (Rewind), PLAY, FF (Fast
Forward), STOP and TV/VCR
5. Your One For All Access 4 is now
operate the same as the keys on
programmed to operate your TV.
your original VCR remote. As a
Write your TV code in the boxes to
safety feature on the One For All
the left for future reference.
Access 4 , you must press the
REC key twice.
Remember, if you want to use your One For
The DIGIT keys (0-9) operate the
All Access 4 to operate your TV, press the TV
same as the digit keys on your
key first.
original remote.
SETUP CODES FOR TVs
The ENTER key operates the
AOC 0030, 0019, 0185
same as the ENTER key on your
Admiral 0093, 0463
original remote.
Aiko 0092
Akai 0030
Alaron 0179
Ambassador 0177
America Action 0180 0030, 0178, 0021, 0019,
Ampro 0751 0018, 0747, 1347
Anam 0180 Philco 0054, 0463, 0030, 0145,
Anam National 0055 0019
Apex Digital 0748, 0765, 0767 Philips 0054, 1354
Audiovox 0451, 0180, 0092, 0623 Pilot 0030, 0019
Baysonic 0180 Pioneer 0166, 0679
Belcor 0019 Portland 0019, 0092
Bell & Howell 0154, 0016 Princeton 0717
Bradford 0180 Prism 0051
Brockwood 0019 Proscan 0047, 0747
Broksonic 0236, 0463 Proton 0178, 0466
CXC 0180 Pulsar 0017, 0019
Candle 0030, 0056 Quasar 0250, 0051, 0165, 0055
Carnivale 0030 RCA 0047, 0019, 0018, 0090,
Carver 0054 0679, 0747, 1047, 1147,
Celebrity 0000 1247, 1347, 1447
Changhong 0765 Radio Shack 0047, 0154, 0165, 0180,
Cineral 0451, 0092 0030, 0178, 0019, 0056,
Citizen 0060, 0030, 0056, 0092 0747
Clairtone 0185 Realistic 0154, 0165, 0180, 0030,
Concerto 0056 0178, 0019, 0056
Contec 0180, 0185 Rhapsody 0185
Craig 0180 Runco 0017, 0030, 0603
Crosley 0054 SSS 0180, 0019
Crown 0180 Sampo 0030
Curtis Mathes 0047, 0054, 0154, 0451, Samsung 0060, 0030, 0178, 0019,
0093, 0060, 0030, 0145, 0056
0056, 0016, 0166, 0466, Sansei 0451
0747, 1147, 1347 Sansui 0463
Daewoo 0451, 0019, 0092, 0623 Sanyo 0154, 0159
Daytron 0019 Scimitsu 0019
Denon 0145 Scotch 0178
Dumont 0017, 0019 Scott 0236, 0180, 0178, 0019,
Dwin 0720, 0774 0179
Electroband 0000, 0185 Sears 0047, 0054, 0154, 0156,
Emerson 0154, 0236, 0463, 0180, 0178, 0179, 0056, 0159,
0282, 0178, 0019, 0179, 0171, 0747
0177, 0185, 0623 Semivox 0180
Envision 0030 Semp 0156
Fisher 0154, 0159 Sharp 0093, 0165, 0688
Fujitsu 0179, 0683 Shogun 0019
Funai 0180, 0179, 0171 Signature 0016
Futuretech 0180 Simpson 0187
GE 0047, 0051, 0451, 0282, Sony 0000
0178, 0021, 0055, 0747, Soundesign 0180, 0178, 0179
1147, 1347 Squareview 0171
Gibralter 0017, 0030, 0019 Starlite 0180
GoldStar 0030, 0178, 0019 Supreme 0000
Gradiente 0053, 0056 Sylvania 0054, 0030, 0171
Grunpy 0180, 0179 Symphonic 0180, 0171
Hallmark 0178 TMK 0178, 0056, 0177
Harley Davidson 0179 TNCi 0017
Harman/Kardon 0054 Tandy 0093
Harvard 0180 Tatung 0055
Havermy 0093 Technics 0250, 0051
Hitachi 0145, 0056, 0016, 0151 Technol Ace 0179
Infinity 0054 Techwood 0051, 0056
Inteq 0017 Teknika 0054, 0180, 0150, 0060,
JBL 0054 0019, 0179, 0056, 0016,
JCB 0000 0092
JVC 0053 Telefunken 0056
KEC 0180 Toshiba 0154, 0156, 0060, 1256
KTV 0180, 0030, 0185 Tosonic 0185
Kenwood 0030, 0019 Vector Research 0030
Konka 0628, 0632, 0638, 0703, Victor 0053
0707 Vidikron 0054
LG 0056 Vidtech 0178, 0019
LXI 0047, 0054, 0154, 0156, Wards 0054, 0165, 0030, 0178,
0178, 0747 0021, 0019, 0179, 0056,
Logik 0016 0016
Luxman 0056 Waycon 0156
MEI 0185 White Westinghouse 0463, 0623
MGA 0150, 0030, 0178, 0019 Yamaha 0030, 0019
MTC 0060, 0030, 0019, 0056, Zenith 0017, 0463, 0016, 0092
0185
Magnavox 0054, 0030, 0179, 0187,
Programming the One For All Access 4 to
1254
operate your VCR/DVD:
Majestic 0016
Marantz 0054, 0030 Locate the brand name of your VCR/DVD and
Matsushita 0250 then write it in the space below.
Megatron 0178, 0145
Memorex 0154, 0250, 0463, 0150, VCR/DVD Brand: _______________________
0178, 0179, 0016
Locate the brand name of your VCR/DVD in
Midland 0047, 0017, 0051, 0747
the "SETUP CODES FOR VCR/DVDs"
Minutz 0021
Mitsubishi 0093, 0150, 0178, 0019 section. The brands are listed in alphabetical
Motorola 0093, 0055 order with the most popular codes listed first.
Multitech 0180 You will use one of these codes to program
NAD 0156, 0178, 0166 your One For All Access 4 to operate your
NEC 0030, 0019, 0056
VCR/DVD.
NTC 0092
Nikko 0030, 0178, 0092 To program the One For All Access 4 to
Noshi 0018 operate your VCR/DVD:
Onwa 0180
1. Turn on your VCR/DVD and insert
Optimus 0154, 0250, 0166
a tape/disc.
Optonica 0093, 0165
Orion 0236, 0463, 0179
Panasonic 0250, 0051, 0055
2. Press VCR/DVD and release.
VCR
Penney 0047, 0156, 0051, 0060, DVD
Press and hold SET until the One
For All Access 4's red light blinks Logik 0072
twice, then release SET. MEI 0035
MGA 0240, 0043
MGN Technology 0240
3. Enter the first four-digit VCR/DVD
MTC 0240, 0000
code listed for your brand in the
Magnavox 0035, 0039, 0081, 0000,
"SETUP CODES FOR VCR/DVDs"
0149
section. If you perform this
Magnin 0240
procedure correctly, the red light
Marantz 0035, 0081
will blink twice when you enter the
Marta 0037
final digit of your code.
Matsushita 0035, 0162, 0454
Memorex 0035, 0162, 0037, 0048,
4. Aim the One For All Access 4 at
0039, 0047, 0240, 0000,
POWER
your VCR/DVD and press
0104, 0209, 0046, 0307,
POWER. Your VCR/DVD should
0454, 0479, 1037, 1162,
turn off. If your original VCR/DVD
1262
remote control did not have a
Minolta 0042
POWER key, press PLAY. Your
Mitsubishi 0067, 0043
VCR/DVD should start to play. If
Motorola 0035, 0048
your VCR/DVD does not respond,
Multitech 0000, 0072
repeat steps 2-4, trying each code
NEC 0104, 0067, 0041, 0038
listed for your brand until you find
Nikko 0037
the one that operates your VCR/
Noblex 0240
DVD. Olympus 0035
Optimus 1062, 0162, 0037, 0048,
5. Your One For All Access 4 is now 0104, 0432, 0454, 1048,
programmed to operate your VCR/ 1162, 1262
Orion 0184, 0209, 0002, 0479
DVD. Write your VCR/DVD code in
Panasonic 1062, 0035, 0162, 0225,
the boxes to the left for future
0454, 0616, 1162, 1262
reference.
Penney 0035, 0037, 0240, 0042,
0038
Pentax 0042
Philco 0035, 0209, 0479
Philips 0035, 0081, 0618, 1081,
Remember, if you want to use your One For 1181
Pilot 0037
All Access 4 to operate your VCR/DVD, press
Pioneer 0067
the VCR/DVD key first.
Polk Audio 0081
SETUP CODES FOR VCRs Portland 0020
Admiral 0048, 0209 Profitronic 0240
Adventura 0000 Proscan 0060, 0760
Aiko 0278 Protec 0072
Aiwa 0037, 0000, 0307 Pulsar 0039
Akai 0041, 0106 Quarter 0046
America Action 0278 Quartz 0046
American High 0035 Quasar 0035, 0162, 0454, 1162
Asha 0240 RCA 0060, 0240, 0042, 0149,
Audiovox 0037, 0278 0106, 0760
Beaumark 0240 Radio Shack 0000, 1037
Bell & Howell 0104 Radix 0037
Broksonic 0184, 0121, 0209, 0002, Randex 0037
0479 Realistic 0035, 0037, 0048, 0047,
CCE 0072, 0278 0000, 0104, 0046
Calix 0037 ReplayTV 0614, 0616
Canon 0035 Runco 0039
Capehart 0020 STS 0042
Carver 0081 Samsung 0240, 0045
Cineral 0278 Sanky 0048, 0039
Citizen 0037, 0278 Sansui 0000, 0067, 0209, 0041,
Colt 0072 271, 0479
Craig 0037, 0047, 0240, 0072, Sanyo 0047, 0240, 0104, 0046
0271 Scott 0184, 0045, 0121, 0043
Curtis Mathes 0060, 0035, 0162, 0041, Sears 0035, 0037, 0047, 0000,
0760 0042, 0104, 0046
Cybernex 0240 Semp 0045
Daewoo 0045, 0278, 0020 Sharp 0048
Daytron 0020 Shintom 0072
Denon 0042 Shogun 0240
Dynatech 0000 Singer 0072
Electrohome 0037 Sonic Blue 0614, 0616
Electrophonic 0037 Sony 0035, 0032, 0000, 0033,
Emerex 0032 0636, 1032
Emerson 0037, 0184, 0000, 0121, Sylvania 0035, 0081, 0000, 0043
0043, 0209, 0002, 0278, Symphonic 0000
0208, 0479 TMK 0240, 0208
Fisher 0047, 0104 Tatung 0041
Fuji 0035, 0033 Teac 0000, 0041
Funai 0000 Technics 0035, 0162
GE 0060, 0035, 0240, 0760 Teknika 0035, 0037, 0000
Garrard 0000 Thomas 0000
Go Video 0279, 0432, 0526 Tivo 0618, 0636
GoldStar 0037, 0038 Toshiba 0045, 0043
Gradiente 0000 Totevision 0037, 0240
HI-Q 0047 Unitech 0240
Harley Davidson 0000 Vector 0045
Harman/Kardon 0081, 0038 Vector Research 0038
Harwood 0072 Video Concepts 0045
Headquarter 0046 Videomagic 0037
Hitachi 0000, 0042, 0041 Videosonic 0240
Hughes Network Villain 0000
Systems 0042 Wards 0060, 0035, 0048, 0047,
JVC 0067, 0041 0081, 0240, 0000, 0042,
Jensen 0041 0072, 0149, 0760
KEC 0037, 0278 White Westinghouse 0209, 0072
KLH 0072 XR-1000 0035, 0000, 0072
Kenwood 0067, 0041, 0038 Yamaha 0038
Kodak 0035, 0037 Zenith 0039, 0000, 0209, 0033,
LXI 0037 0479
Lloyd's 0000, 0208
SETUP CODES FOR DVD PLAYERS : NOTE: If your TV/VCR is working on one of
Aiwa 0641 the above codes highlighted with an asterisk
Apex Digital 0672, 0717, 0755, 0794, (*), you may need to program a separate TV
0795, 0796, 0797, 0830, code in order to control the volume.
0856
B & K 0655, 0662 Set-Up Codes for TV/VCR Combos
Blue Parade 0571 Broksonic 0002
DVD2000 0521 Citizen 0278
Denon 0490, 0634 Colt 0072
Emerson 0591 Emerson 0002
Enterprise 0591 Funai 0000
Fisher 0670 GE 0240
GE 0522, 0717 Harley Davidson 0000
Gradiente 0651 Hitachi 0000
Greenhill 0717 Lloyd's 0000
Harman/Kardon 0582 Magnasonic 0278
Hitachi 0573, 0664 Magnavox 0000
Hiteker 0672 Magnin 0240
JVC 0558, 0623 MGA 0240
KLH 0717 Memorex 0037, 0454, 1037, 1162,
Kenwood 0490, 0534, 0682 1262
Konka 0711, 0719, 0720, 0721 Optimus 0454, 1162, 1262
Koss 0651 Orion 0002
Magnavox 0503, 0675 Penney 0240, 1035, 1237
Marantz 0539 Quasar 1162
Microsoft 0522 Radio Shack 1037
Mintek 0717 RCA 0240
Mitsubishi 0521 Sansui 0000
Nesa 0717 Sanyo 0240
Onkyo 0503, 0627 Sears 0000
Oritron 0651 Sony 0000
Panasonic 0490, 0632 Symphonic 0000
Philips 0503, 0539 Thomas 0000
Pioneer 0525, 0571, 0632
Zenith 0000
Polk Audio 0539
Princeton 0674
Programming the One For All Access 4 to
Proscan 0522
operate your Cable Converter or Receiver
RCA 0522, 0571, 0717
Satellite:
Rotel 0623
Samsung 0573
Locate the brand name of your Cable
Sanyo 0670
Converter or Receiver Satellite and then write
Sharp 0630
it in the space below.
Sherwood 0633
Shinsonic 0533
Cable or Receiver Satellite
Sony 0533
Brand:_____________________________
Sylvania 0675
Technics 0490
Locate the brand name of your Cable
Techwood 0692
Converter or Receiver Satellite in the "SETUP
Theta Digital 0571
CODES FOR CABLE CONVERTERS" or
Toshiba 0503
"SETUP CODES FOR RECEIVER
Urban Concepts 0503
SATELLITES" section. The brands are listed in
Yamaha 0490, 0539, 0545
alphabetical order with the most popular codes
Zenith 0503, 0591 \
listed first. You will use one of these codes to
program your One For All Access 4 to operate
Programming TV/VCR Combo control
your Cable Converter or Receiver Satellite.
Perform the following instructions to To program the One For All Access 4 to
control a TV/VCR Combo: operate your Cable Converter or Receiver
Satellite:
1. Turn on the TV/VCR Combo
1. Turn on your Cable Converter or
and insert a video cassette.
Receiver Satellite.
NOTE: Please read steps 2-4 completely
2. Press CBL/SAT and release.
before proceeding. Highlight or write down the CBL
SAT
Press and hold SET until the One
codes and device you wish to program before
For All Access 4's red light blinks
moving on to step 2.
twice, then release SET.
2. On the remote control, press
VCR
DVD 3. Enter the first four-digit Cable
VCR. Press and hold SET until
Converter or Receiver Satellite
the LED blinks twice, then
code listed for your brand in the
release SET.
"SETUP CODES FOR CABLE
CONVERTERS" or "SETUP
3. Use the Setup Codes For
CODES FOR RECEIVER
TV/VCR Combos (in front) to
SATELLITES" section. If you
locate the brand name and then
perform this procedure correctly,
enter the first four-digit code for
the red light will blink twice when
your device. If performed
you enter the final digit of your
correctly, the LED will blink
code.
twice.
4. Aim the One For All Access 4 at
NOTE: If the LED did not blink twice, then
POWER
your Cable Converter or Receiver
repeat steps 2 through 3 and try entering the
Satellite and press POWER. Your
same code again.
Cable Converter or Receiver
Satellite should turn off. If your
4. Aim the remote control at the
POWER Cable Converter or Receiver
device and press POWER
Satellite does not respond, repeat
once. It should turn off. If the
steps 2-4, trying each code
device does not respond,
listed for your brand until you find
repeat steps 2-3, trying each
the one that operates your Cable
code for your brand until you
Converter.
find one that works. If it still
does not work, try Searching
5. Your One For All Access 4 is now
For Your Code.
programmed to operate your
Cable Converter or Receiver
NOTE: If the device does not have a
Satellite. Write your Cable
POWER key, press the (Play) key.
Converter or Receiver Satellite
code in the boxes to the left for
future reference.