Table of Contents
Advertisement
10
Recording
Turn on the TV and select the VIDEO channel (or AV mode).
STANDBY/ON
TIMER
REC LINK
TV/ VCR
2
N U M BER
4
RECO RD
6
IN FO RM ATIO N
When using the AV connection (
between TV mode and AV mode by pressing TV/ VCR .
* Depending on the type of TV used, TV/ VCR button does
not function as described above.
Recording Resume Function
If there is a power outage during recording (or Instant Timer
Recording or timer recording), the recording will resume
automatically when power is restored to the recorder
unless the recorder's memory backup has expired.
Downloaded from:
https://www.usersmanualguide.com/
5
1
DISPLAY
TV PROG
2
4
6
1
2
3
2
4
5
6
7
8
9
0
4
TV PRO G
SP/ LP
1
?
4,5
PLAY
PAU SE
pg. 5), you can switch
TV signals being received by the recorder's built-in tuner can be
recorded onto a video tape. You can " capture" a TV programme
using your video recorder.
LO AD A CASSETTE
1
Insert a cassette with the record safety tab intact (See
below).
CHO O SE A PRO GRAMME
2
Press TV PRO G +/ – or the N U M BER keys to select the
preset you wish to record.
SET T APE SPEED
3
Press SP/ LP (
recorder display panel to confirm the selected tape
speed.
5
STA RT RECO RDIN G
4
Press and hold RECO RD and press PLAY on the remote
control, or press RECO RD on the recorder.
PA USE/ RESUM E
RECO RDIN G
2
5
Press PAU SE . Press PLAY to resume recording.
3
STO P RECO RDIN G
5
6
Press STO P on the remote control or STO P/ EJECT on
the recorder. Then press STO P/ EJECT to remove the
cassette.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
BASIC O PERATIO N S (cont.)
The counter is reset to 0:00:00 and the recorder
power comes on automatically.
) . Check the SP/LP indicator on the
Picture quality of LP recordings will not be as high as
on SP recordings.
B.E.S.T. takes place at the beginning of both the
first SP and the first LP recording after inserting the
cassette (
pg. 18).
You can not change the preset whilst recording is in
progress. To change the preset, see step 5 .
During the Record Pause mode, you can change the
preset by pressing the TV PRO G +/ – buttons or the
N U M BER keys.
Record safety tab
Advertisement
Table of Contents
