Clock Set - JVC VIDEOPlus+ HR-J465EK Instructions Manual

Clock Set

Turn on the TV and select the VIDEO channel (or AV mode).
M EN U
Just Clock
The J ust Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The J ust Clock option can be set "ON" or "OFF" at the Clock
Set screen (the default setting is "ON"). Press O K until the
J ust Clock setting begins blinking, then press %fi to change
the setting.
IM PO RTAN T: If you turn the J ust Clock function off, the
accuracy of your recorder's built-in clock may be impaired,
which could adversely affect timer recording.
N O TES:
J ust Clock (when set to "ON") adjusts the recorder's built-in
clock every hour, except for 23:00, 0:00, 1:00 and 2:00.
J ust Clock is not effective when . . .
– the recorder's power is on.
– the recorder is in the Timer mode.
– a difference of more than 3 minutes exists between the
built-in clock's time and the actual time.
– the recorder is in the Auto Satellite Prog Rec mode (
20).
If J ust Clock is set to "ON", the recorder's clock is automati-
cally adjusted at the start/end of Summer Time.
J ust Clock may not function properly in poor reception
conditions.
Downloaded from: https://www.usersmanualguide.com/
1 2 3
2
4 5 6
7 8 9
0
4
1 ?
O K
IM PO RTAN T
If you performed Auto Set Up (
Set ( pg. 30), without ever having set the clock previ-
ously, the recorder's built-in clock is also set automatically.
Perform the following steps only if —
— Auto Clock Set has not been performed correctly by
Auto Set Up or Auto Channel Set.
or
— the recorder's memory backup has expired.
or
— you want to change J ust Clock setting (
the left column).
TURN THE RECO RDER O N
1
Press .
ACCESS MAIN MEN U SCREEN
2
Press M EN U .
ACCESS IN ITIAL SET SCREEN
3
Move the highlight bar (pointer) to "INITIAL SET" by
pressing %fi , then press O K or
ACCESS CLO CK SET SCREEN
4
Move the highlight bar (pointer) to "CLOCK SET" by
pressing %fi , then press O K or
appears.
INITIAL SET
CLOCK SET
GUIDE PROG SET
[5 ∞ ] =
[MENU] : EXIT
SET DATE AN D TIME
5
Press %fi to set the time, then press O K or
"DATE" display begins blinking. Repeat the same
procedure to set the date and year.
When you set the time, press and hold %fi to
change the time by 30 minutes.
When you set the date, press and hold %fi to change
the date by 15 days.
SET JUST CLO CK
6
The default setting is " ON" . Set as desired by pressing
%fi , then press
For the J ust clock function,
If you set to " OFF" , you can disregard the next step as
you won't be able to receive regular clock adjustments.
SET CLO CK DAT A SO URCE PRESET
7
The recorder is preset to receive clock setting and
adjustment data from preset position 1. Press %fi to set
the preset position to the number representing the
pg.
station transmitting clock setting data (BBC1, BBC2,
etc.), then press O K or
ST ART CLO CK O PERATIO N
8
Press M EN U .
pg. 6) or Auto Channel
"J ust Clock" in
# .
. The Clock Set screen
#
CLOCK SET
TIME DATE
0: 00 01 . 01
JUST CLOCK: ON
TV PR. : 1
[5∞] =
[MENU] : EXIT
#
O K or # .
"J ust Clock" on the left.
# .
37
YEAR
99
. The