About The Heading Screen - Garmin GHP 10V Marine Autopilot System Owner's Manual

Getting Started

about the Heading screen

The heading screen displays the status of the autopilot and the heading. You
can use the soft keys to engage the autopilot and manually adjust the heading
from the heading screen.
When you turn on the autopilot, the system starts in standby mode, and
displays the heading screen on the GHC 10.
➊
➋
➌
➍
Item Description
Autopilot status
➊
Actual heading
➋
Rudder position indicator (sailboat and rudder sensor-
➌
equipped powerboats only)
Soft key functions
➍
2
When you select engage to activate the autopilot heading hold, the autopilot
takes control of the helm and steers the boat to maintain your heading. The
intended heading is indicated on the compass at the top of the heading
➊
screen.
Refer to page 12 for information about the sailboat wind hold screen.
➊
GHC 10 Owner's Manual