Table of Contents
Advertisement
5.3
Operation
Before the device is switched on, the voltage selector must be set with a screwdriver
to the voltage of the local power supply, either 115 or 220 V (+/-10%).
The diaphragm pump is switched on and off at the ON/OFF switch.
Observe the basic safety instructions when using the pump.
5.4
Storage
The pumps are to be stored in a low-dust, interior room within the temperature range from
+ 5 to + 40 °C and at a relative air humidity < 90%.
Leave the protective elements on the suction and pressure ports. Another equally good pro-
tection may be used. The interior of the pump heads must be dry and free of condensates.
The interior of the pump heads must be dry and free of condensates.
5.5
Scrap Disposal
The diaphragm pumps must be disposed of in accordance with the 2002/96/EC gui-
deline and the specific national regulations.
Contaminated diaphragm pumps must be decontaminated according to the laws.
Installation and Operation
400082
CAUTION!
CAUTION !
CAUTION !
13
Advertisement
Table of Contents
