Advertisement
D4DH
When Installing at the Center
The arm lever is set for center installation at the time of shipment.
Note: Install the arm lever so that it will not rotate more than 90°,
or the lever will hit the switch body.
When Installing to the Left
Remove the screw and arm lever, position the arm lever to
the left, and then secure it with the screw.
Note: Install the arm lever so that it will not rotate more than
180°, or the lever will hit the switch body.
When Installing to the Right
Remove the screw and arm lever, position the arm lever to
the right, and then secure it with the screw.
Note: Install the arm lever so that it will not rotate more than
180°, thus preventing the lever from hitting the switch
body.
8
Advertisement
