Setting Up Your Humidifier - Vicks CoolMoisture V3900 Series Use And Care Manual

Setting Up Your Humidifier

Step 1
Soak Filter
Step 1
1.
Remove tank.
2.
Soak the filter in cool water. DO NOT wring filter.
3.
Insert new filter into unit by gently folding and inserting into filter slot.
VapoPads
Step 1
1.
Remove tank and locate VapoPad slot.
2.
Open VapoPad by tearing notch on pad bag. DO NOT touch pad with hands. If pad is touched
DO NOT rub face or eyes as it may cause irritation.
3.
Insert Vicks VapoPad with angled end facing downward into the scent pad area.
Vicks VapoPads work with heat to gradually release soothing aromatic vapors.
Recommended Usage for the Vicks Menthol Scent Pad (VSP-19 / VSP19VPC):
• Not recommended for infants under 10 pounds
• For children between 10-22 pounds do not use more than 2 pads in a 24 hour period
4
1.
Placement: Select a firm, level location at least 6" (15cm) from any
walls for proper airflow. Place the humidifier on a water-resistant
surface, as water can damage furniture and some flooring.
Manufacturer/Distributor will not accept responsibility for property damage
caused by water spillage.
Step 2
Step 2
Step 3
Step 3