Download Print this page

Setting Up Your Humidifier; Operating Your Humidifier - Vicks StarryNight V3700 Series Use And Care Manual

Cool moisture humidifier
Hide thumbs Also See for StarryNight V3700 Series:

Advertisement

SETTING UP YOUR HUMIDIFIER

Step 1
Placement
Select a firm, level location at least 6"
(15cm) from any walls for proper airflow.
Place the humidifier on a water-resistant
surface, as water can damage furniture
and some flooring.
Kaz will not accept responsibility for property damage caused by water spillage.
Step 1
Soak Filter
Remove tank and set
aside. Remove filter from
humidifier and soak the
filter in cool water.
DO NOT wring filter.
Step 1
Scent Pad
(Optional)
Remove tank and locate
Scent Pad slot.
WARNING: DO NOT add any medications (e.g. VapoSteam, inhalants or essential oils) into Mist Outlet,
Base, Water Reservoir or Water Tank. Doing so will damage the humidifier and void your warranty.
Vicks
Scent Pads work with heat to gradually release soothing aromatic vapors.
®
One complimentary menthol vapor scent pad is included with your unit.
Recommended Usage for the Vicks
· Not recommended for infants under 4.5 kg.
· For children between 4.5-10 kg do not use more than 2 pads in a 24 hour period.
4
Step 2
Step 3
Remove filter tray from
Fold filter flat. Insert
unit before installing the
wet filter into filter tray.
wet filter.
Place filter tray back
in humidifier.
Step 2
Step 3
If there is a used scent pad
Insert scent pad with angled
in the slot carefully remove
side facing downward into
it. Replace with a new scent
the scent pad slot. You can
pad. Carefully open scent
use the bag as a holder
pad bag taking care to hold
during insertion.
pad using bag. Use care not
to come in direct contact
with new scent pad.
Menthol Scent Pad (VSP-19):
®
SETTING UP YOUR HUMIDIFIER (
'
.)
cont
d
Scent Pad
WARNING: DO NOT rub face or eyes after touching scent pad. DO NOT put fingers in mouth
after touching scent pad. Oils in the pad could act as an irritant to eyes.
(Optional)
WARNING: As long as your humidifier is on, the scent pad heater will also be activated. This
area can be warm to the touch.
INGREDIENTS: Eucalyptus Oil, Menthol, Glycol, Cedar Leaf Oil & Others
NOTE: Replace with Vicks
®
Scent Pads, models VSP-19
Fill Tank
Step 1
Turn tank upside-down.
Remove tank cap by turning
counter-clockwise
.
Do not use hot water when filling humidifier

OPERATING YOUR HUMIDIFIER

Step 1
Power
Output
Step 1
StarryNight
Step 1
Projector
Step 2
Step 3
Fill tank with cool tap water.
Once the filled water tank
has been placed on the base
Replace tank cap. Tighten
do not move humidifier.
by turning clockwise
.
Doing so could cause
Place tank back on humidifier.
leakage and spills.
With the power switch in the OFF position, plug the filled
humidifier into a polarized 240V outlet.
DO NOT plug in humidifier with wet hands to avoid
electric shock.
Set fan speed to desired output:
Max (
) Max Moisture
Sleep Mode (
) Night time sound sleep mode
Turn the power switch to the on position to activate the
starrynight projector.
Note: Projector can be operated independently of the humidifier.
5

Advertisement

loading