Technical Data - Philips DTR 210 User Manual

Technical Data

General
- DVB terrestrial Free-To-Air receiver
compliant to EN 300 744
- VHF and UHF frequency range support
- Video and Audio out via 2x SCART
- Digital audio out
- Fast channel search
- Reed-Solomon decoding support (EN 300 744)
- Automatic FEC selection (1/2, 2/3, 3/4, 5/6, 7/8)
- MPEG2 Transport Stream support: ISO/IEC 13818-1
- DVB-Video/-Audio support: ISO/IEC 13818-2, -3
- Software update via antenna (update over air)
Base specification
- QPSK / QAM16/64 demodulation compliant to DVB
terrestrial standard EN 300 744
- COFDM 2k and 8k
- VHF and UHF support (174 ... 862 MHz)
- 7/8 MHz channel bandwidth
- Guard Interval Modes: 1/32, 1/16, 1/8, 1/4 active symbol
duration
- Fast PLL tuning speed:
step size 62,5 kHz / 166,67 kHz
Input /Output
2x SCART (VCR & TV) out
- TV SCART video out: RGB, CVBS, Y/C
- VCR SCART video out: CVBS, Y/C
- switching signal: 0 / 6 / 12V
- Audio out (left/right)
Digital audio out (S/PDIF)
RF input
connector IEC60169-2 female
- termination 75 Ohm
- Return Loss: min. 6 dB (75 Ohm)
Loop-Through of RF signals
- output termination 75 Ohm
T D
ECHNICAL ATA
20
Power Supply
- Power supply 230VAC/50Hz to 12VDC
- Operation power consumption less 7 W
- Maximum stand-by mode consumption: 5 W
Dimensions of the device: approx. 250 x 140 x 32 mm
Accessories
- Power Supply
- SCART/SCART cable
- Remote Control
- 2 Batteries (for remote control)
- User manual
Temperature
- Temperature-Range +5 °C...+40°C
This product complies with the requirements
of the 95/47/EC and 2002/21/EC directives.
The product complies with the following European council
Directives: 73/23/EEC, 93/68/EEC and 89/336/EEC.