Table of Contents
Advertisement
Miscellaneous functions
Restoring default settings
You can reset the device to default settings. In doing so,
the individually composed favourites list is deleted.
1 Press the MENU button to open the main menu.
2 Highlight the item settings by using the arrow buttons
or
and press the OK button.
3 Highlight the item calling up default settings and press
the OK button.
4 Set yes by using the arrow button
button.
The device carries out a reboot. It switches off, and
shortly afterwards switches on again.
5 Carry out an initial installation, see page 10.
Displaying channel and system information /
adjusting the antenna
This function (nearly) solely serves to supply information
on one channel. However, you can use it for adjusting your
antenna and for improving the television reception.
1 Press the MENU button to open the main menu.
2 Highlight the item channel and system information by
using the arrow buttons
button.
3 Select the item channel information and press the OK
button.
4 Adjust your antenna so that the two specifications signal
strength and signal quality display a preferably high
value.
O
PERATION
16
, and press the OK
or
, and press the OK
Note: Depending on your antenna, you can possibly also carry
out settings on your antenna.
5 Press the EXIT button 1x and acknowledge the selec-
tion system information by using the OK button.
Here you find technical information on your device. This
information normally is only relevant with regard to sup-
port.
6 Press the EXIT button twice to return to the normal TV
programme.
Displaying the time
1 Press the TEXT button
the screen during programme replay.
2 Press any TEXT button to hide the time again.
Switching between set top box and TV
1 Press the TV/STB key to switch between the set top box
and the TV signal.
Carrying out software update
Note: For this purpose, the device has to be set to standby
operation.
Every night between 1 am and 5 am, the device checks
whether a software update is available. If this is the case,
you''ll receive an according message when switching the
receiver on the next time, and you can start the software
update.
You can also start the search process manually.
1 Open the main menu and select the option system
information from the field cheannel and system
information.
2 Highlight the item software update by using the arrow
buttons .
3 Press the OK button to start the software update.
Radio
Note: A digital radio programme currently is not broadcasted
in all countries via antenna.
1 If a digital radio programme is broadcasted in your coun-
try, press the RADIO button to receive it.
2 In order to view the TV programme again, press the
RADIO button again.
to receive a time display on
Advertisement
Table of Contents
