Digital Set Top Box
Front view
IR Receiver / Red LED, Normal Operation - off, Standby - on
Rear view
Mains Adaptor
The Remote Control
Using the Remote Control
To use the remote control, point it towards the front of
the set top box.
The remote control will not operate if its path is blocked.
Warning:
Sunlight or very bright light will decrease the
sensitivity of the remote control.
Mains adaptor
A mains power adaptor has been supplied for powering
this equipment. It has an integral cable terminated in a
power connector to plug directly into the 12V connector
on the back of the Digital Set Top Box. The adaptor is
shown on the right.
Plug the cable into the 12V DC connector on the rear
panel. Insert the adaptor body into a suitable mains outlet
socket.
G
S
ETTING
TARTED
8
RF out
RF in
from Aerial
Plug this into a 230V AC
outlet socket
Scart output
connector for VCR
and DVD units
Power cable (1.5 m)
Power connector for connection to
Set Top Box
Note that the only recommended way to disconnect the
Digital Set Top Box from the mains supply is to remove
the adaptor from the mains socket. If the mains socket is
fitted with a switch, this could be used instead.
Set Top Box
Power Supply Adaptor
Set Top Box rear panel
Scart output
Power Supply in,
connector for
12 V DC
TV
SPDIF
(Digital audio out)
To 230V AC
mains supply
+12V DC