Connecting Your Digital Set Top Box To; Other Equipment; Connecting To A Television And Dvd Player; Connecting To A Tv And Audio Equipment - Philips DTR 210 User Manual

Connecting Your Digital Set Top Box to other equipment
The following diagrams are of typical configurations only, and may differ slightly to your existing external equipment. If you are
unsure on how to connect to your set top box, always consult your manufacturer's user guide supplied with your equipment.

Connecting to a Television and DVD player

UHF Aerial
Set Top Box rear panel
Example DVD player, rear panel
If you decide to connect a DVD player or recorder to the VCR Scart of your digital receiver, we advise to set the DVD out-
put format to CVBS or PAL. Refer to the user manual of your DVD player or recorder.
You can use a S/Pdif connector to connect your Set Top Box to a digital sound input device, such as a receiver.

Connecting to a TV and audio equipment

UHF Aerial
Set Top Box rear panel
Example audio equipment, rear panel
SCART input on TV
SCART to SCART
cable (supplied)
RF In RF Out
connector connector
SCART to SCART
cable (not supplied)
SCART input on TV
SCART to SCART
cable (supplied)
RF Out
connector
RF In
connector
Example TV set, rear panel
Set Top Box Power
Supply Adaptor
SCART
(supplied)
output
to TV
12V DC
SCART
to DVD player
Example TV set, rear panel
Set Top Box Power
Supply Adaptor
SCART
(supplied)
output
12V DC
to TV
SPDIF
Digital audio out
G S
ETTING TARTED
9