Garmin Rino 520 Owner's Manual page 46

u o >c p
nIt peratIon oMpass
To.calibrate.the.Electronic.Compass:
1. Use the Page button to access the Compass
Page.
2. Use the Thumb.Stick to highlight the Option.
Menu button and press In.
3. Highlight the Calibrate.Compass option and
press the Thumb.Stick In.
4. Press the Thumb.Stick In to activate the Start
button and then follow on-screen directions for
holding and turning the unit. Hold the unit level
when calibrating the compass.
Calibrating the compass: Hold the unit face up
and level while slowly rotating it.
The unit displays a "Just Right," "Too Fast," or
"Too Slow" message to help you to adjust your
turning speed as needed.
3
age
The "Calibration Successful" message displays
when finished. If a "Calibration Failed" message
displays, repeat the process.
When you manually turn the Compass Off, it stays off
until you manually turn it On again.
To.turn.the.compass.on.and.off:
• Press and hold the Zoom (Z) button. A message
appears on the screen indicating that the compass
has been turned on or off.
Rino 520/530 Owner's Manual
®