Kenmore KW3030 Use & Care Manual page 18

Before storing your vacuum, the collection tank should be emptied and cleaned. The
accessories should be cleaned and stored so they can be readily available when needed.
Store the wet/dry vacuum indoors.
Repairs for this wet/dry vacuum should be performed only by qualified service personnel
using only identical replacement parts.
INSTALLING & CLEANING REUSABLE CLOTH FILTER
INSTALLING REUSABLE CLOTH FILTER
1. Verify that the power cord is
disconnected from the outlet.
2. Remove the powerhead and place in an
upside-down position.
3. Install the reusable cloth filter over the
filter cage making sure the cage is
completely covered.
4. Place the powerhead back onto the
collection tank.
REMOVING & CLEANING REUSABLE
CLOTH FILTER
1. With the removed powerhead in an
upside-down position, carefully remove
the reusable cloth filter from the filter
cage.
STORAGE
REPAIRS
2. Clean the reusable cloth filter by gently
tapping or brushing dirt off. Cleaning
should not be done indoors in living
areas. For optimal performance, a new
filter is recommended.
3. Use a mild soap and water solution to
wash reusable cloth filter and rinse with
clean water.
4. Allow the wet filter to air dry for 24
hours before installing onto the filter
cage.
5. Install cleaned or new filters as above
in steps 2-4 of Installing Reusable Cloth
Filter.
- 18 -
5