Machine Cleaning And Maintenance - Electrolux SkyLine ChillS 6GN 1/1 User Manual

Blast chillers/freezers
Table of Contents

Advertisement

Models
SKCH30 (30kg)
SKCH50 (50kg)
SKCH70 (70kg)
SKCH100 (100kg)
SKCH150 (150kg)
SKCH200 (200kg)
1.
Trolley is an optional accessory. Refer to the relevant specifications.
A.6

Machine cleaning and maintenance

• Before carrying out any cleaning or maintenance, disconnect the appliance from the power supply. For details see the Electrical
Connection paragraph in the Installation Manual.
• Do not touch the appliance with wet hands or feet or when barefoot.
• Do not remove the safety guards.
• Use a ladder with suitable protection for work on appliances with accessibility from above.
• Use suitable personal protection equipment.
• Machine maintenance, checking and overhaul operations must only be carried out by specialised personnel or the Customer
Care Service, provided with adequate personal protection equipment, tools and ancillary means.
• Work on the electrical equipment must only be carried out by specialised personnel or the Customer Care Service.
• Put the machine in safe conditions before starting any maintenance operation.
• Respect the requirements for the various routine and extraordinary maintenance operations. Non-compliance with the
instructions can create risks for personnel.
Ordinary maintenance
• Disconnect the power supply before cleaning the appliance.
For details see the Electrical Connection paragraph in the Installation Manual.
• Do not clean the machine with jets of water or with a steam cleaner.
Cleaning the cabinet and accessories
• Pay attention to the selection and use of cleaning products in order to maintain proper appliance performance and safeness.
• Before using the appliance, clean all the internal parts and accessories with lukewarm water and neutral soap, or products that
are over 90% biodegradable (in order to reduce the emission of pollutants into the environment), then rinse and dry thoroughly,
where possible clean with dishwashing machine.
• Do not clean the appliance with detergents containing chlorine, solvent-based cleaning products (e. g. trichloro-ethylene),
abrasive powders or agents, scouring pads or sponges that could damage the surfaces. Do not use organic solvent substances
or essential oils. These substances could damage the parts of the appliance made from synthetic material.
• Do not use products (even if diluted) containing chlorine (sodium hypochlorite, hydrochloric or muriatic acid, etc.) to clean the
floor under the appliance.
• Pay particular attention when handling the core probe; it is a sharp object, therefore handle it very carefully during cleaning.
Preventive Maintenance
• In order to ensure the safety and performance of your equipment, it is recommended that service is undertaken by Electrolux
Professional authorised engineers every 12 months, in accordance with Electrolux Professional Service Manuals. Please
contact your local Electrolux Professional Service Centre for further details.
Repair and extraordinary maintenance
• Repair and extraordinary Maintenance have to be carried out by specialised authorised personnel. The manufacturer declines
any liability for any failure or damage caused by the intervention of an unauthorized technician by the Manufacturer and the
original manufacturer warranty will be invalidated.
Parts and accessories
• Use only original accessories and/or spare parts. Failure to use original accessories and/or spare parts will invalidate the original
manufacturer warranty and may render the machine not compliant with the safety standard.
Maintenance intervals
• The inspection and maintenance intervals depend on the actual machine operating conditions and ambient conditions (presence
of dust, damp, etc.), therefore precise time intervals cannot be given. In any case, careful and periodical machine maintenance is
advisable in order to minimise service interruptions.
• It is advisable to carry out the checks with the frequency given in the following table:
Maintenance, inspections, checks and
cleaning
Ordinary cleaning
• general cleaning of machine and surrounding
area
Mechanical protection devices
• check their condition and for any deformation,
loosening or removed parts
Appliance maximum load (kg)
30
50
100
100
150
200
Frequency
Daily
Every 6 months
Shelf maximum load (kg)
40 (88.18 lb)
40 (88.18 lb)
40 (88.18 lb)
See trolley specifications
See trolley specifications
See trolley specifications
Responsability
Operator
Service
1
1
1
7

Advertisement

Table of Contents
loading

Table of Contents