CPI R900 Install Manual page 2

Enabling bills
Refer to the DIP SW setting to enable or disable bills
(refer to the quick reference guide for specific switch settings based on the model you purchased)
The DIP SW locating on the back of bill validator and open the small clear door to access.
The DIP SW will be all "OFF" setting as factory default.
<MDB Model / ccTalk Model>
B4 B3 B2
<MDBS Model>
B4 B3 B2 B1
<CCNET Model>
B4 B3 B2
[Document Title Name Goes Here]
No. Description
A1 Bill 1
A2 Bill 2
Bill 3
A3
B1 A4 A3 A2 A1
A4 Bill 4
Description
No.
Bill 1
A1
A2
Bill 2
Bill 3
A3
A4 A3 A2 A1
A4 Bill 4
Description
No.
A1 Bill 1
A2 Bill 2
Bill 3
A3
B1 A4 A3 A2 A1
A4 Bill 4
OFF Description
ON No.
Accepted B1 Bill 5
Inhibited
Bill 6
Accepted Inhibited B2
Bill 7
B3
Accepted Inhibited
B4 Security
Accepted Inhibited
OFF ON
No. Description
Accepted
Inhibited B1 Bill 5
Sleep Mode1
Accepted Inhibited B2
Sleep Mode2
Accepted Inhibited B3
B4 Security
Accepted Inhibited
OFF Description
ON No.
Accepted Bill 5
B1
Inhibited
Bill 6
Accepted Inhibited B2
Com Speed
Accepted B3
Inhibited
B4 Security
Accepted Inhibited
OFF ON
Accepted
Inhibited
Accepted Inhibited
Accepted
Inhibited
Standard High
OFF ON
Accepted
Inhibited
Disable Enable
Disable
Enable
Standard High
OFF ON
Accepted
Inhibited
Accepted Inhibited
9600bps
19200bps
Standard High