Error Messages - Sharp CD-MD3000H Operation Manual

Error Messages

When an error message is displayed, proceed as follows:
Error messages Meaning
BLANK DISC Nothing is recorded.
(Neither music nor disc name
is recorded.)
CAN'T COPY You tried to record from a
copy prohibited CD.
CAN'T EDIT A track cannot be edited.
The disc is damaged.
CAN'T READ
TOC information cannot be
(
:Number or
read.
symbol)
MiniDisc not specified.
CAN'T REC Recording cannot be per-
formed correctly due to vibra-
tion or shock in the unit.
CAN'T WRITE The TOC information could
not be created properly due
to a mechanical shock or to
scratches on the disc.
DISC FULL The disc is out of recording
space.
The CD tray is not working
E-CD 20
properly.
A MiniDisc is not working
E-MD
properly.
( :Number or
symbol)
You chose 32 or more tracks
EDIT OVER
for track editing.
A MiniDisc has not been
MD NO DISC
loaded.
CD NO DISC
The MiniDisc data cannot be
read.
A CD has not been loaded.
The CD data cannot be read.
Remedy Error messages
Replace it with another disc. NAME FULL
Replace the CD. NO SIGNAL
Change the stop position of the
track and then try editing it.
Replace it with another disc.
NOT AUDIO
Erase the disc and try record-
ing again.
OVER
Re-record or replace the
PLAY MD
MiniDisc.
PROTECTED
Set this unit to the stand-by
mode and try to write the
TEMP OVER
TOC again. (Remove any
source of shock or vibration
whilst writing.)
TOC FORM
Replace the disc with another
( :Number or
recordable disc.
symbol)
Set this unit to the stand-by
mode and turn the power on
TOC FULL
again.
Set this unit to the stand-by
mode and turn the power on
again.
? DISC
Decrease the number of
tracks.
Load a MiniDisc.
Reload the MiniDisc.
Load a CD.
Reload the CD.
Web-site: www.sharp.co.uk/support
Meaning Remedy
The number of characters for Shorten the disc or track
the disc name or track name name.
exceeds 40.
Poor connection of the digital Connect the digital cable
cable. securely.
No output signal comes out Playback with the connected
from the connected unit to unit.
playback.
The data recorded on this Select another track.
disc is not audio data. Replace the disc.
There is no space to make Replace it with a disc that has
CD editing on the disc. enough time to record.
You tried to record on a play- Replace it with another re-
back-only disc. cordable disc.
The disc is write protected. Move the write protection tab
back to its original position.
The temperature is too high. Set this unit to the stand-by
mode and wait for a whilst.
TOC information recorded on Replace it with another disc.
the MD does not match the Erase the disc and try record-
MiniDisc specifications or it ing again.
cannot be read.
There is no space left for re- Replace it with another re-
cording track numbers. cordable disc.
There is no space left for re- Erase the needless charac-
cording character informa- ters.
tion.
The data contains an error. Replace it with another disc.
MiniDisc not specified.
Help Line: 08705 274277 (office hours)
55