Table of Contents
Advertisement
Operation
8.1 Operation
The inverter is operated using the display buttons as follows:
Table 8- 1
78
Inverter operation using the display buttons
"Inverter On"
"Inverter Off"
The buttons for "Inverter On" and "Inverter Off" are only active if you select the
appropriate self holding as "Operating source".
Use buttons <Arrow down> or <Arrow up> to navigate in the menu.
You specify the speed setpoint by pressing the buttons twice. This function is
only active if the setpoint has been set in the configuration.
Use these buttons as well to select individual actual values such as, e.g. "n-
Motor".
You reach the actual values menu or one actual value menu level higher by
pressing this button.
Press the <Return> button to branch into a submenu to unlock a parameter so
that it can be changed and then lock it again.
If you press the <S> button, you return to the status display with the actual
values.
Acknowledge pending errors by pressing the <S+I> buttons simultaneously.
Press <P> to enter the parameterization menu or to reach a higher parameter
menu level.
Installation and Operating Instructions for LOHER DYNAVERT I Series 7
Operating Instructions, 10/2022, 4BS0745-002
Advertisement
Table of Contents
